Es’hail 2 25.5e

stephan94

stephan94

Specialist Contributor
Messages
467
My Satellite Setup
1.20 Channel master ( Paris)and 1200 Laminas ( Bavaria) KU and C Band
Openbox SX6 and S3 Mini, Dr HD 15, Octagon SF 4008 and Octagon SX88and SX8 HD One, TBS 6983
My Location
Bavaria and Paris
I have everything edited as shown but i just get this when starting CS:
Am I missing something obvious here?
Take this one:
This crazyscan works as it is, you have nothing to change.

good luck

stephan94:)
 
stephan94

stephan94

Specialist Contributor
Messages
467
My Satellite Setup
1.20 Channel master ( Paris)and 1200 Laminas ( Bavaria) KU and C Band
Openbox SX6 and S3 Mini, Dr HD 15, Octagon SF 4008 and Octagon SX88and SX8 HD One, TBS 6983
My Location
Bavaria and Paris
I managed to lock a SR of 100 :)

26°0E_1904061313.jpg26°0E_10497_H.jpg
 
SatSearcher

SatSearcher

Regular Member
Messages
220
My Satellite Setup
1m orbital dish with 0.1 Technomate LNB. TBS 6903 & TBS 5925 Card & Octagon SF4008. 39E-55W.
My Location
West Yorkshire
Many thanks Stephan, that works a treat! Although I'm still a little confused as to how, as looking at the ini files, they look to be configured the same as the ones I was already using, so still scratching my head a little! But thanks again!
 
fereshte

fereshte

Member
Messages
44
Location
Bulgaria
My Satellite Setup
2,30m prime focus dish with 3 LNBs - C ( Linear plus Circular ) and KU ( Linear ) ; 2,05m prime focus dish - KU circular and in future hopefully - ka band - 103E - 50W ; Octagon SF4008 UHD ; Edision Primo IP ; Inverto Flange white series ; Invacom quad; 36" motors; Especta and Moteck satellite positioners.
My Location
Bulgaria
Hi guys ! I bought a BOWEI LNB 10-10.7 GHz from aliexpress , then put it on my 230 cm prime focus dish but not in the center of the dish, alongside the rest multifeed LNBs. Then the issue began - on the receiver what I have to put in the two LOF lines and threshold ( it is enigma2 receiver octagon 4008 uhd ). I wrote 9750 there but no signal , then on an another receiver not enigma 2 I put 9750 or 10050 ghz lnb freq but no signal on 10493H2000. Here I read that the symbol rare changes often and perhaps this is the reason why I got anything. In what position I have to rotate put the LNB - in the way that the main LNB is rotated in its position or ? It is a new thing for me to setup such a LNB in these low ku band frequencies. Thanks if someone can respond to solve my problem ! According to flysat there is one stable frequency - promo channel of Eshail sat.. Is that correct ?
 
mar-val

mar-val

Regular Member
Messages
202
My Satellite Setup
DR.HD F15,TBS 6983,dishes 70-220
My Location
Slovakia,Zilina
I think , on LNB MUST be LO parameter.
BOWEI LNB 10-10.7 with google search shows LO 9Ghz.
 
fereshte

fereshte

Member
Messages
44
Location
Bulgaria
My Satellite Setup
2,30m prime focus dish with 3 LNBs - C ( Linear plus Circular ) and KU ( Linear ) ; 2,05m prime focus dish - KU circular and in future hopefully - ka band - 103E - 50W ; Octagon SF4008 UHD ; Edision Primo IP ; Inverto Flange white series ; Invacom quad; 36" motors; Especta and Moteck satellite positioners.
My Location
Bulgaria
Then 9750 GHz is the right LNB freq, I rotated the dish - not a clue on 10493H2000 - then I read here that this frequency's symbol rate very often changes. I do not have a PC Receiver, my receiver is octagon sf4008 uhd.
 
Channel Hopper

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Messages
27,122
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK South
9750 will not be the correct local oscillator to get 10.493GHz.

Try a manual frequency input of 11.493 using the same parameters of s/r
 
fereshte

fereshte

Member
Messages
44
Location
Bulgaria
My Satellite Setup
2,30m prime focus dish with 3 LNBs - C ( Linear plus Circular ) and KU ( Linear ) ; 2,05m prime focus dish - KU circular and in future hopefully - ka band - 103E - 50W ; Octagon SF4008 UHD ; Edision Primo IP ; Inverto Flange white series ; Invacom quad; 36" motors; Especta and Moteck satellite positioners.
My Location
Bulgaria
All right, I am going to put 11493 but the oscillator remains as usual - Universal LNB or the numbers have to be different ? Thanks for you help.
 
Channel Hopper

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Messages
27,122
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK South
All right, I am going to put 11493 but the oscillator remains as usual - Universal LNB or the numbers have to be different ? Thanks for you help.
If you cannot use a custom lo of 10GHz then with universal settings add 250 to the 11493. Though if the software cut off in the receiver occurs at 11700 you will need to work the calculation with the same conversion on the 10600 upper band.
 
dwabbit

dwabbit

New Member
Messages
7
My Satellite Setup
zgemma x2 plus 2x 1m dishes and 1 80cm dish for eshail 2 for ham radio
My Location
lincolnshire
2 stations at 66ks


123998123999
 
stephan94

stephan94

Specialist Contributor
Messages
467
My Satellite Setup
1.20 Channel master ( Paris)and 1200 Laminas ( Bavaria) KU and C Band
Openbox SX6 and S3 Mini, Dr HD 15, Octagon SF 4008 and Octagon SX88and SX8 HD One, TBS 6983
My Location
Bavaria and Paris
With luck, I was busy receiving Es'hail2 when a radio amateur took over from ISS.23°5E_1905071647_10484-10534 H.jpg23°5E_1905071647.jpg23°5E_10498_H_1.jpg23°5E_10498_H_4718.jpg26.0E_10498,102_H_333_(2019-05-07 16.33.54)_dump.ts_20190507_163855.605.jpg
 
satesco

satesco

Specialist Contributor
Messages
859
My Satellite Setup
seven antennas,one toroidal with 16 lnbs,
6 satellite receivers,2 Meters,9 PC cards(tbs6983,6903,6590,6522,6209,2603,6909X,6903X,skystar hd2),2 tuners usb-tbs5927,Skystar HD.
Satellite reception between 100.5E-50.0W
My Location
Romania
Now is off,but I caught a transponder(11495 H,1000,1/2,S2) which uses the HEVC codec with low symbol rates?
It's worth monitoring these transponders,because tests are done here for the use of all sorts of parameters,as shown on this topic or on other sites.It seems to me that's the purpose of these "Amateurs" :) It's actually the place where these "amateurs" meet with us,dxers,or rather, where the last ones are expected to come... :)
 

Attachments

Last edited:
stephan94

stephan94

Specialist Contributor
Messages
467
My Satellite Setup
1.20 Channel master ( Paris)and 1200 Laminas ( Bavaria) KU and C Band
Openbox SX6 and S3 Mini, Dr HD 15, Octagon SF 4008 and Octagon SX88and SX8 HD One, TBS 6983
My Location
Bavaria and Paris
10497,4 H 333 2/3
G7JTT-JOHN
26°0E_10497_H_1.jpg26°0E_10497_H_0810.jpg
 
stephan94

stephan94

Specialist Contributor
Messages
467
My Satellite Setup
1.20 Channel master ( Paris)and 1200 Laminas ( Bavaria) KU and C Band
Openbox SX6 and S3 Mini, Dr HD 15, Octagon SF 4008 and Octagon SX88and SX8 HD One, TBS 6983
My Location
Bavaria and Paris
10498 H 333 2/3
G7NTG
26°0E_10498_H_1.jpg26°0E_10498_H_4714.jpg
 
stephan94

stephan94

Specialist Contributor
Messages
467
My Satellite Setup
1.20 Channel master ( Paris)and 1200 Laminas ( Bavaria) KU and C Band
Openbox SX6 and S3 Mini, Dr HD 15, Octagon SF 4008 and Octagon SX88and SX8 HD One, TBS 6983
My Location
Bavaria and Paris
10495,8 H 500 3/4
ON1WW
26°0E_10496_H_1.jpg26°0E_10496_H_1855.jpg
 
stephan94

stephan94

Specialist Contributor
Messages
467
My Satellite Setup
1.20 Channel master ( Paris)and 1200 Laminas ( Bavaria) KU and C Band
Openbox SX6 and S3 Mini, Dr HD 15, Octagon SF 4008 and Octagon SX88and SX8 HD One, TBS 6983
My Location
Bavaria and Paris
After replacing my old LNB IBU with a new Edision QSL-4, I have the feeling that the very close and very small SR can lure better.
Just a feeling; I did not have a timer with me
Both frequencies can even be seen in the screenshot of CT1BYM's screen
26°0E_10497_H_1-horz.jpg26°0E_10498_H_1-horz.jpgnah fr.jpg
 
Top