feed horn C120 adapter

[RobertM60]

looking for Fibo lnb c120 - feed-horn adapter
any sugestions ?

 

[Robbo]

Is this what you mean?

http://www.satellites.co.uk/satelli...orised-systems/82462-c120-lnb.html#post496510

 

[RobertM60]

Yes thats the part i need.
where can i get it in germany ?

 

[dorsetbob]

HI RobertM60

Try this post
http://www.satellites.co.uk/satelli...38006-fibo-90cm-dish-fixed-mount-bracket.html

This is an alternative way with a Hirschmann.
Worked for me!!

Bob

 

[guest poster]

If you don't get fixed up, we are getting some C120 flanges made. If you can give me the dimensions of the body of the adapter (ridges etc) and how it fits into the horn, we should be able to put one together to fit the Fibo horn.

 

[Snuffer]

I now a shop that seell it i can send you this FLANGE, price are 23 Euro without transport.

 

[RobertM60]

Hi Snuffer

tanks for your offer , will send you a PM .
Has this shop a webpage ?

Merci

 

[dorsetbob]

Try here _http://www.internet-sat-shop.de/shop/product_info.php?cPath=22_33&products_id=1767
All you need to do is cut off the feedhorn and you have a c120 adapter.
I did it myself and it works perfectly.
Hope it helps.

Bob

 

[kamaleon]

looking for Fibo lnb c120 - feed-horn adapter
any sugestions ?

Sure,

Try here:
_http://satmueller.de/ costs 18€ plus 10€ shipping inside Germany 'O'-red
_http://www.seh1.de/angebote.asp
_http://www.fernseh-panzer.de/ 18€ and shipping inside Germany is cheaper than Satmueller, you should give them a try. They usually reply pretty fast.

I also have a contact in France and Snuffer has adapters in Holland.

These are all original fibo C120 adapters, otherwise you can go Dorsetbob's way and butcher something that will fit.

On the same shop that Bob has shown there's a 90° angle adapter but it's outrageously expensive:
_http://www.internet-sat-shop.de/shop/product_info.php?manufacturers_id=&products_id=1765

Regards, kamaleon

 

[guest poster]

Try here _http://www.internet-sat-shop.de/shop/product_info.php?cPath=22_33&products_id=1767
All you need to do is cut off the feedhorn and you have a c120 adapter.
I did it myself and it works perfectly.
Hope it helps.

Bob

What f/d ratio are those feed horns .. I take it .6? and would swap with asc feedhorn?

 

[dorsetbob]

Looking at the box it came in and the instructions there is no mention of the f/d ratio.Not that I needed it as the feedhorn on the Fibo is in a fixed position.
It is supposed to be for a CAS5585F feed adapter and from what i can see you need a 25mm clamp.
Can you swap with asc? I don't know.
There is not much information available about them.
Perhaps Falconsat would know,that's were I bought it.
I can scan the instructions if you need them.
Just ask me.

Bob

 

[guest poster]

Thanks Bob...

that number refers to the lnb holder on the manufacturers site...

is this it ....

_http://www.falconsat.co.uk/hirschmann-csa850a-feedhorn-p-435.html?osCsid=r9ln0bn5lnte8n70v0nsgmqh33

 

[dorsetbob]

That's the one!!!
I can scan the instructions that came with it if you need them.
It's got some dimensions and full instructions on how to install.

Bob

 

[guest poster]

That's the one!!!
I can scan the instructions that came with it if you need them.
It's got some dimensions and full instructions on how to install.

Bob

Thanks..

I think a few people might like to see that and if it could be used as an alternative feedhorn for dishes like asc/Andrews/Channel Masters etc.. instead of the asc feed horn. It's certainly a lot cheaper.

 

[dorsetbob]

This is what came in box




Bob