andyman502
Member
- Joined
- Mar 28, 2008
- Messages
- 47
- Reaction score
- 0
- Points
- 0
- Age
- 35
- My Satellite Setup
-
80cm Dish 0.3 lnb
Motek SG2100a Motor
Compro PCI DVB-S Card
Athlon 2600+ 1.5GB Ram XP Pro
iMac 2.4 10.5.2 :)
- My Location
- North West UK
Hi all, Ive just bought my self a motor from southern satellite which gave great service. Now I have set my latitude on the scale on the back to roughly 53.7. The angle on the bracket on the dish I believe I can set when I'm aligning for my nearest due south satellite?
The main question I have is my longtitude shows as -2.740°. Should I use 1W as my reference for south? Also do I set the motor to 1W then spin the whole assembly to face the satellite, or do I simply leave my motor at 0° then point to the whole assembly to 1W??
Thanks Alot Andy
The main question I have is my longtitude shows as -2.740°. Should I use 1W as my reference for south? Also do I set the motor to 1W then spin the whole assembly to face the satellite, or do I simply leave my motor at 0° then point to the whole assembly to 1W??
Thanks Alot Andy