Firmware Update

pkgaran

Member
Joined
Dec 25, 2007
Messages
16
Reaction score
0
Points
0
Age
43
My Satellite Setup
INSAT 4B
NSS 6
ST1
ABS 1
EDUSAT
My Location
PONDICHERRY INDIA
Hi Friends,

I am using Hicway STB Receiver, I would like to upgrade the firmware for the same. The Receiver RS 232 Port has 4 Pins which has Ground, Tx, Rx and 3.2V.
How to connect this 4 pins to 9pin DB (RS232). Can anyone figure out schematic diagram for the same?.

Also I request you to share the software for upload/download the firmware.

Your early response will be highly appreciated.

Thankyou,

Regards,

P Karuangaran
 

HB13DISH

Retired Mod
Joined
Aug 13, 2007
Messages
3,764
Reaction score
1
Points
0
Age
76
My Location
Middle East - Israel
pkgaran said:
Hi Friends,

I am using Hicway STB Receiver, I would like to upgrade the firmware for the same. The Receiver RS 232 Port has 4 Pins which has Ground, Tx, Rx and 3.2V.
How to connect this 4 pins to 9pin DB (RS232). Can anyone figure out schematic diagram for the same?.

Also I request you to share the software for upload/download the firmware.

Your early response will be highly appreciated.

Thankyou,

Regards,

P Karuangaran

Usually you connect the STB and PC with a null modem cable. 9 pin to 9 pin female.
Not sure why you say you have a 4 pin connector.
Is it a standard D-Type 9 pin plug with only 4 pins loaded?
Attach a photo to show this connector.
 

ophiq

Member
Joined
Apr 8, 2008
Messages
1
Reaction score
0
Points
0
Age
40
My Satellite Setup
hello
My Location
Jakarta
hi,..
can anyone help me, i need a software update for HICway-2000H.
where can i find for this software?

thank you for your attention...

Regards,
Tofik
 
Top