fitting sky quad lnb

[rolfw]

That should be OK, WF100 is very difficult to bend too tight.

 

[wod]

great as its been working fine and comparing the signal levels the wf100 cable run gets a better signal

excuse the messy cables on the dish as thats how i had to put em as not got any cable ties

 

[wod]

rolfw you got any idea whats wrong as now i cant recieve tp 11.264h on my fta box on the 2nd run from the quad

but the channels affected are fine on the sky box so cant be dish alignment and its only this tp so is it the lnb ?

 

[wod]

seems swapping the sky box over to 2nd fta box feed channels affected work fine but connecting the fta box to the sky feed the channels still say no signal ?

so is there something wrong with my fta box its a technomate tm1500 ci that i was just using on 28e till i got my motorised dish up

 

[2cvbloke]

Have you tried giving it a retune? Usually sorts things out for me...

 

[wod]

i haven't actually but its wierd that its only 1tp i checked the listing on flysat and the pids where different on the site so changed and didn't do a thing

is there a much better site that is up to date ?

 

[rolfw]

I always use Lyngsat

 

[2cvbloke]

i haven't actually but its wierd that its only 1tp i checked the listing on flysat and the pids where different on the site so changed and didn't do a thing

is there a much better site that is up to date ?

I usually use Lyngsat, but I don't know how up to date it is...

 

[andy25cfc]

I found my Quad LNB laying on the ground today, still got sky. Any simple instructions to refit it ? Many Thanks

 

[Robbo]

Well,it depends on why it is laying on the ground.

Is something broken?, if so you may need to get a replacement, if you read the rest of this thread you will see that is very easy to fit. Normally the holder just slides down the end of the LNB arm.

Robbo