tornado-Odessa
Member
- Joined
- Jan 9, 2006
- Messages
- 34
- Reaction score
- 0
- Points
- 0
- Age
- 64
- My Satellite Setup
- Globo 6000
- My Location
- Odessa, Ukraine
Hello all,
I am having a really hard time getting this setup, when I don't think it should be. this is what is happening, when I go into motor config in Gemini I add one of the already preset dat positions 1=13E for this motor. I add 1 and the orbital position 130 and add it. this is after unchecking the gotoX box.
I am already pointing at 13E, so I goto next page and select position in mode and change the sateliite to 13E and store that to position 1. I save and recheck the GotoX box.
This works fine. Now if I want to add another same procedure, I uncheck the GotoX box and I add 18=28.2E and 282 orbital position, goto next page choose 28.2E still in pos mode. go back to the previous menu save and check the gotoX button, once I hit exit, I recieve a msgbox that say's
Please wait while turning motor to 28.2 "Nice, but it never goes away" I have to reboot the dm500s, it it goes directly to 13E.
It seems when I am in motor config and go to the next page and choose a sat like 13 or 28E, I have to manually step the motor to the correct position, then do a save or a store position.
Can anyone help me figure out, what I'm doing wrong..or what I need to change in the way that I am setting this up ?
I am having a really hard time getting this setup, when I don't think it should be. this is what is happening, when I go into motor config in Gemini I add one of the already preset dat positions 1=13E for this motor. I add 1 and the orbital position 130 and add it. this is after unchecking the gotoX box.
I am already pointing at 13E, so I goto next page and select position in mode and change the sateliite to 13E and store that to position 1. I save and recheck the GotoX box.
This works fine. Now if I want to add another same procedure, I uncheck the GotoX box and I add 18=28.2E and 282 orbital position, goto next page choose 28.2E still in pos mode. go back to the previous menu save and check the gotoX button, once I hit exit, I recieve a msgbox that say's
Please wait while turning motor to 28.2 "Nice, but it never goes away" I have to reboot the dm500s, it it goes directly to 13E.
It seems when I am in motor config and go to the next page and choose a sat like 13 or 28E, I have to manually step the motor to the correct position, then do a save or a store position.
Can anyone help me figure out, what I'm doing wrong..or what I need to change in the way that I am setting this up ?