HI!
How R U. I hope you will be fine .First of all I tell you the following apparatus I have. A Matrix Reloaded Cam Hardware=1.5
S/W=MR 1.055
Loader=1.0
My receiver is Opentel ODS 2000 CIP
Main software 6.57(boat loader 8.10)
checksum = 09729EA8
RSS 232 cable (serial cable)
A Fun card programming software (Fun Magic)
A Fun card Programmer to programme fun card
Two fun card 6 (ATMEL AT 90S8515 8Kb Flash)
I want to upgrade matrix reloaded cam to version 1.081 or 1.100 latest version with the help of fun cards
I programme the fun cards with the following software
uload-software-flash.hex+mr1.081-1024-1=1*fun 6 card
uload-software-flash.hex+mr1.081-1024-2=1*fun 6 card
I on my TV. set and STB receiver.I selected CI Menu on my STB.when I open CI menu it shows following options
card information
set up
information
when I open setup it shows
Edit cas key
Change nagravission box key
Blocker
Upgrade firmware
set default key
But when I press OK at upgrade firmware. the following message comes
Erasing old data please wait insert card one or serial dummy card. I inserted the card which I programmed. it showed card inserted,opening and "performing Serial download". according to matrix web site read me text for upgrading with fun card ,it should be "Performing smart card download"
But after a few minutes I got a message
"Cable removed or baudrate is too high for this STB. Please try again".I tried repeatedly but each time I got the above message
I tried withe following receivers
Neosat 9800 CI
SUPERMAX 6000CI
Please tell me where am I wrong.Please help me I am really fed up of trying repeatedly .It will be great help .
.I am really in mess.I can not go ahead after this error. Please do reply soon .
I shall be thankful to you .
with regard
How R U. I hope you will be fine .First of all I tell you the following apparatus I have. A Matrix Reloaded Cam Hardware=1.5
S/W=MR 1.055
Loader=1.0
My receiver is Opentel ODS 2000 CIP
Main software 6.57(boat loader 8.10)
checksum = 09729EA8
RSS 232 cable (serial cable)
A Fun card programming software (Fun Magic)
A Fun card Programmer to programme fun card
Two fun card 6 (ATMEL AT 90S8515 8Kb Flash)
I want to upgrade matrix reloaded cam to version 1.081 or 1.100 latest version with the help of fun cards
I programme the fun cards with the following software
uload-software-flash.hex+mr1.081-1024-1=1*fun 6 card
uload-software-flash.hex+mr1.081-1024-2=1*fun 6 card
I on my TV. set and STB receiver.I selected CI Menu on my STB.when I open CI menu it shows following options
card information
set up
information
when I open setup it shows
Edit cas key
Change nagravission box key
Blocker
Upgrade firmware
set default key
But when I press OK at upgrade firmware. the following message comes
Erasing old data please wait insert card one or serial dummy card. I inserted the card which I programmed. it showed card inserted,opening and "performing Serial download". according to matrix web site read me text for upgrading with fun card ,it should be "Performing smart card download"
But after a few minutes I got a message
"Cable removed or baudrate is too high for this STB. Please try again".I tried repeatedly but each time I got the above message
I tried withe following receivers
Neosat 9800 CI
SUPERMAX 6000CI
Please tell me where am I wrong.Please help me I am really fed up of trying repeatedly .It will be great help .
.I am really in mess.I can not go ahead after this error. Please do reply soon .
I shall be thankful to you .
with regard