martinw01908
Regular Member
- Joined
- May 11, 2004
- Messages
- 122
- Reaction score
- 4
- Points
- 18
- Age
- 51
- My Satellite Setup
- Technomate 9100 and 90cm dish motorised
- My Location
- South East Midlands
He told me it didn't boot. So I was prepared for flashing it via the com port. However it does boot, but there is no display on the TV ie no video output. So I can't access any box menu settings.
I can communicate with it via the PC through my router, browse the web interface. I think he might have tried a new image but looking at this via the web interface I am not so sure:
ModelM7000Manufacturerream-Multimedia-TVProcessor:STB04500, 252MHzHarddisk:noneUSB Stick:Vendor = Generic, Product = Mass Storage DeviceLinux Kernel:Linux version 2.6.9 (ghost@Client) (gcc version 3.4.3) #1 Mon Mar 14 15:53:41 CET 2005 Firmware:The Gemini Project 1.0.7, 18.03.2005FP Firmware:1.05Web Interface:2.8.1
I can change channels and hear sound via the optical out (but no video)
It's set up on multiboot. I'm wondering if its a hardware fault not an image problem. If somebody please could point me in the right direction I would be very grateful>>!!
I can communicate with it via the PC through my router, browse the web interface. I think he might have tried a new image but looking at this via the web interface I am not so sure:
ModelM7000Manufacturerream-Multimedia-TVProcessor:STB04500, 252MHzHarddisk:noneUSB Stick:Vendor = Generic, Product = Mass Storage DeviceLinux Kernel:Linux version 2.6.9 (ghost@Client) (gcc version 3.4.3) #1 Mon Mar 14 15:53:41 CET 2005 Firmware:The Gemini Project 1.0.7, 18.03.2005FP Firmware:1.05Web Interface:2.8.1
I can change channels and hear sound via the optical out (but no video)
It's set up on multiboot. I'm wondering if its a hardware fault not an image problem. If somebody please could point me in the right direction I would be very grateful>>!!