Bathino
Regular Member
- Joined
- Jul 28, 2005
- Messages
- 8
- Reaction score
- 0
- Points
- 0
- Age
- 65
- My Satellite Setup
- StarSat
- My Location
- Surrey, UK
Hi everyone,
My six- month old StarSat SR-X3500CUCI ha s died without doing anything to it. When switched on, the LCD shows L120, then BOOT, then after few seconds it hangs on forever, showing one letter of the previous word.
I have contacted StarSat, and after many lengthy deliberations, they told me in one email that the flash memory needs to be changed and in another one that it needs to be reprogrammed. Both should be done in their Service in Dubai. Something that’s not possible without throwing around £150 for postage the whole receiver.
Every time I use IRDTool or Simple Upload for both the upgrade or the Flash , it hangs again after the stage above, giving this log:
“Simple Upload
Waing BABO
0: [¯»فے]
4: [¯»فے¯»فے]
== After switching ON
12: [DNDN]
16: [CLKRV_Init : 0 CLKRV0 ]
38: [DENC_Open : 0]
54: [VTG_Open : 0]
69: [VID_Open : 0]
84: [Start TTXHandlerTask]
107: [Start TTXBufferPoolingTask]
136: []
139: [g_dwVideoPictureDisplayCnt : 4]
169: [CHECK : 20040305 20041009]
197: []”
On their own Loader, it gives the following log:
“DNDNCLKRV_Init : 0 CLKRV0
DENC_Open : 0
VTG_Open : 0
VID_Open : 0
Start TTXHandlerTask
St”
I’ve searched this site and the whole internet for a solution, and I’ve done everthing I could, and it seems to me as if am hitting a rock wall. I’ve come across JTag, but not sure if I could do it.
Is there someone out there who can help please?
I’m willing to pay anyone who can handle the repair if necessary.
Sorry for the long story, and many thanks for your time and efforts. Please don’t spare me any thought.
My six- month old StarSat SR-X3500CUCI ha s died without doing anything to it. When switched on, the LCD shows L120, then BOOT, then after few seconds it hangs on forever, showing one letter of the previous word.
I have contacted StarSat, and after many lengthy deliberations, they told me in one email that the flash memory needs to be changed and in another one that it needs to be reprogrammed. Both should be done in their Service in Dubai. Something that’s not possible without throwing around £150 for postage the whole receiver.
Every time I use IRDTool or Simple Upload for both the upgrade or the Flash , it hangs again after the stage above, giving this log:
“Simple Upload
Waing BABO
0: [¯»فے]
4: [¯»فے¯»فے]
== After switching ON
12: [DNDN]
16: [CLKRV_Init : 0 CLKRV0 ]
38: [DENC_Open : 0]
54: [VTG_Open : 0]
69: [VID_Open : 0]
84: [Start TTXHandlerTask]
107: [Start TTXBufferPoolingTask]
136: []
139: [g_dwVideoPictureDisplayCnt : 4]
169: [CHECK : 20040305 20041009]
197: []”
On their own Loader, it gives the following log:
“DNDNCLKRV_Init : 0 CLKRV0
DENC_Open : 0
VTG_Open : 0
VID_Open : 0
Start TTXHandlerTask
St”
I’ve searched this site and the whole internet for a solution, and I’ve done everthing I could, and it seems to me as if am hitting a rock wall. I’ve come across JTag, but not sure if I could do it.
Is there someone out there who can help please?
I’m willing to pay anyone who can handle the repair if necessary.
Sorry for the long story, and many thanks for your time and efforts. Please don’t spare me any thought.