avilys
Member
- Joined
- Jul 20, 2007
- Messages
- 2
- Reaction score
- 0
- Points
- 0
- My Satellite Setup
- Panasonic TU-DSB31/Sky, SilverCrest SL 65/FTA, FTE 1.1m
- My Location
- Slovenia
I am in a process of buying a bigger dish (Prodelin 3.0m), hoping to receive the Astra 2D signal. I would really appreciate any advice about how to correctly/precisely assemble the 8 petals to get the most out of the antenna.
How should I check the final work before fitting it on the mast pipe?
Is the dual-polarity feed provided with the antenna (see below) good enough or should I find a better one?
Thanks!
Prodelin 3.0m Specifications: _http://www.tripointglobal.com/Antennas/Data_Sheets/3-34-37ro.pdf
Prodelin 3.0m Manual: _http://www.tripointglobal.com/Prodelin/Technical_Docs/manuals/4096-538.pdf
How should I check the final work before fitting it on the mast pipe?
Is the dual-polarity feed provided with the antenna (see below) good enough or should I find a better one?
Thanks!
Prodelin 3.0m Specifications: _http://www.tripointglobal.com/Antennas/Data_Sheets/3-34-37ro.pdf
Prodelin 3.0m Manual: _http://www.tripointglobal.com/Prodelin/Technical_Docs/manuals/4096-538.pdf