martinw01908
Regular Member
- Joined
- May 11, 2004
- Messages
- 122
- Reaction score
- 4
- Points
- 18
- Age
- 51
- My Satellite Setup
- Technomate 9100 and 90cm dish motorised
- My Location
- South East Midlands
I am posting here as a last resort, hoping somebody can help. I have been trying to sort this box out for him since Nov. Now I have it here to play with and still I have no joy. Should I advise my friend to return it to the shop?
The box was supplied from the shop with the RU_Dream imageV1.8 pre-loaded. No HD. The problem is that I can't get write any files into any of the folders. I can copy the contents and even delete files (sometimes) but not transfer anything new into it. I cannot update the keys via the net. It doesn't seem to remember the settings... ie when you tell it to use the newcamd EMU instead of the Common Interface the next time you switch it on it forgets this info. Also it always moves the dish to 43W everytime you switch it on. It does not remember the last SAT that it was viewing before putting it into standby. Is this normal?
The first time the box was installed the LNB loopthough was installed to his skybox. According to the dealer who installed it, doing this corrupted the box and they box was taken away to be re flashed with the image again. Not sure if this is a common problem but thought I would mention it in case this is relevant.
So we have tried connecting to the box via two different PC's different LAN cables, different routers. Used 5 different FTP progs and still the contents of the folders cannot be CHMODDED. So should this box bed returned to the dealer?
Thanks in advance
The box was supplied from the shop with the RU_Dream imageV1.8 pre-loaded. No HD. The problem is that I can't get write any files into any of the folders. I can copy the contents and even delete files (sometimes) but not transfer anything new into it. I cannot update the keys via the net. It doesn't seem to remember the settings... ie when you tell it to use the newcamd EMU instead of the Common Interface the next time you switch it on it forgets this info. Also it always moves the dish to 43W everytime you switch it on. It does not remember the last SAT that it was viewing before putting it into standby. Is this normal?
The first time the box was installed the LNB loopthough was installed to his skybox. According to the dealer who installed it, doing this corrupted the box and they box was taken away to be re flashed with the image again. Not sure if this is a common problem but thought I would mention it in case this is relevant.
So we have tried connecting to the box via two different PC's different LAN cables, different routers. Used 5 different FTP progs and still the contents of the folders cannot be CHMODDED. So should this box bed returned to the dealer?
Thanks in advance