michael01707
Regular Member
- Joined
- Jul 20, 2007
- Messages
- 130
- Reaction score
- 0
- Points
- 16
- Age
- 39
- My Satellite Setup
- Channel Master 1.2m and 1.8m, Vantage VT-X221TS CI and 8000s, Technomate V-Box II, 18" Superjack actuator
- My Location
- London
I am an absolute novice, so apologies if what I write makes no sense.
I have a 10 year old IRTE 1.2m dish which hasn't been used for quite a while.
I want to get a new LNB, actuator motor and possibly a feedhorn. I have a couple of problems with what I should be buying. With the actuator motor I am not sure what size I need. I have the old actuator arm but I am not sure where I should be measuring it, ie. from the motor to the fixed part of the arm or the full length?
With regard to the LNB and feedhorn, I am not sure if the same fittings are used with modern LNBs and feedhorns. I'm also wondering if I should keep the existing feedhorn or is there a newer better matched feedhorn for this dish. I have included pictures of the old equipment I have.
Help would be greatly appreciated!
I have a 10 year old IRTE 1.2m dish which hasn't been used for quite a while.
I want to get a new LNB, actuator motor and possibly a feedhorn. I have a couple of problems with what I should be buying. With the actuator motor I am not sure what size I need. I have the old actuator arm but I am not sure where I should be measuring it, ie. from the motor to the fixed part of the arm or the full length?
With regard to the LNB and feedhorn, I am not sure if the same fittings are used with modern LNBs and feedhorns. I'm also wondering if I should keep the existing feedhorn or is there a newer better matched feedhorn for this dish. I have included pictures of the old equipment I have.
Help would be greatly appreciated!