• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

How do I enter keys in Kaon ksc receiver?

Messages
7
Likes
0
#1
Do any know how to enter the key in Kaon receiver?
plz help.
 
Messages
5
Likes
0
#3
you can enter the keys by thes way
1-yellow button
2-blue button
3-green button
4-menu button
after that the keys list will be open
and you can chenge the system by the buttons of the vollume left & right
 
Messages
5
Likes
0
#4
mahmod yasen said:
you can enter the keys by thes way
1-yellow button
2-blue button
3-green button
4-menu button
after that the keys list will be open
and you can chenge the system by the buttons of the vollume left & right
Ihave tried these but nothing happens?
tried opning ca system as well but still nothing please can you help me please
twix
 

aikon0029

Regular Member
Messages
324
Likes
0
My Satellite Setup
CPU Intel® Pentium® 4 640 Prescott (3.20 Ghz)
Memory 1024 MB DDR RAM - (2x 512 MB - PC3200)
Motherboard ECS 915P-M3
Hard Drive 300GB Maxtor DiamondMax SATA 6B300S0 Skystar 2 usb 1.1mtr steerable dish Manhattan XT[CM, Quali 1080ir
My Location
London [South East]
#5
twix said:
Ihave tried these but nothing happens?
tried opning ca system as well but still nothing please can you help me please
twix
Have you actually put in the codes or are you saying you cannot access the actual code input page after following the instructions already posted?
 
Messages
5
Likes
0
#6
aikon0029 said:
Have you actually put in the codes or are you saying you cannot access the actual code input page after following the instructions already posted?
hi
yes you got it sorry been so long answering but waited for some kind reply
when i have a picture on sreen i have tried the coulred butons but no code input page

have gone intoca system all i can get on there is to put codes in but canot put input page in as all it gives me is 3 boxs but canot put leters in but nothing
i followed your instructions presed the coulred butons but nothing
yellow gives me timer
so where am i going wrong please i need help
twix
 
Messages
5
Likes
0
#7
twix said:
hi
yes you got it sorry been so long answering but waited for some kind reply
when i have a picture on sreen i have tried the coulred butons but no code input page

have gone intoca system all i can get on there is to put codes in but canot put input page in as all it gives me is 3 boxs but canot put leters in but nothing
i followed your instructions presed the coulred butons but nothing
yellow gives me timer
so where am i going wrong please i need help
twix
sorry i did not put codes in ok canot open with coulred buttons twix
 

aikon0029

Regular Member
Messages
324
Likes
0
My Satellite Setup
CPU Intel® Pentium® 4 640 Prescott (3.20 Ghz)
Memory 1024 MB DDR RAM - (2x 512 MB - PC3200)
Motherboard ECS 915P-M3
Hard Drive 300GB Maxtor DiamondMax SATA 6B300S0 Skystar 2 usb 1.1mtr steerable dish Manhattan XT[CM, Quali 1080ir
My Location
London [South East]
#8
twix said:
sorry i did not put codes in ok canot open with coulred buttons twix
May I suggest you disconnect the receiver from the power supply, then give it one [1] minute, and then reconnect to the power supply, when picture appears on screen then press yellow, blue, green, and menu, but you have to do it quickly like 1234 do not leave an interval between pressing each button. Other than that, I can only assume your receiver does not have this facility, or that the receiver is faulty, in that case you will have to return the receiver to the dealer from whom it was purchased, hope this helps ok.
 
Messages
2
Likes
0
My Satellite Setup
Kaon 570
#11
mahmod yasen said:
you can enter the keys by thes way
1-yellow button
2-blue button
3-green button
4-menu button
after that the keys list will be open
and you can chenge the system by the buttons of the vollume left & right
Hi, I have just bought a KAON 570. Where can i find the keys for french channels?