SHEHU A S said:
Anybody who knows the procedure for flashing any receiver should tell me the step by step procedure involved. Where are my learned colleagues?
Dear,Flashing your receiver is programming the Flash memory wich contains boot and software informations.You need a Jtag cable or Labtool to do that.
Each model of receivers has his special flash type,like
m29f400bt------->0.5 Mbytes
39vf800a------>1 Mbytes
39vf160 ------->2 Mbytes
39vf1602------->4 Mbytes
You should know your receiver's flash, it's a big ship inside the box.
Do not try to do that, you may destroy it. Let a technician do it if there is a need.