How do I get Dragon Cam to work from new?

starman123

Member
Joined
Jan 27, 2005
Messages
1
Reaction score
0
Points
0
Age
64
Hi all,
I`ve just purchased a Dragon Cam , Dragon Loader card (Fun7) ,and Xplus TV card.
I am new to cards and CAMS,so could anyone please tell me :

1.Will the loader card have come with firmware loaded, or is it blank?

2.What procedure do I have to go through to install the CAM in my Technomate
5500 DACPI?

3.How do I go about getting my XPlus TV card to work for the first time?

4.Is using a card programmer a fairly easy task to do?

5.What is the best recommended programmer to use?

Thanks to anyone who can help me with these points.
 

mholali

Regular Member
Joined
Sep 19, 2004
Messages
32
Reaction score
0
Points
0
Age
47
starman123 said:
Hi all,
I`ve just purchased a Dragon Cam , Dragon Loader card (Fun7) ,and Xplus TV card.
I am new to cards and CAMS,so could anyone please tell me :

1.Will the loader card have come with firmware loaded, or is it blank?

2.What procedure do I have to go through to install the CAM in my Technomate
5500 DACPI?

3.How do I go about getting my XPlus TV card to work for the first time?

4.Is using a card programmer a fairly easy task to do?

5.What is the best recommended programmer to use?

Thanks to anyone who can help me with these points.


You need the Infinity USB programmer with a USB cable to your PC to load up your Dragon CAM. Follow the procedure below....

Download the latest Dragon patch i.e. Pred 3.04 from the Dragon Module website or satkey.org. Unzip the files and save them. And follow the procedure below....

WITH THE LATEST INFINITY PROGRAMMER SOFTWARE VERSION 1.48, IT IS POSSIBLE TO WRITE THE FUN 7 BASED LOADER c*rd FROM THE INFINITY ITSELF, WITH OUT USING THE DRAGonloadER.EXE PROGRAM.

1. SELECT FUN 7 c*rd AND PUT THE FUN7LDR.HEX IN THE FLASH FILE.

2. ADD THE PREDATOR BIN FILE TO THE EXT EEPROM 1.

3. SOFTWARE WILL THEN RECOGNISE THE FUN7 IS FOR DRAGON AND OFFER 3 OPTIONS FOR CORRECT LOADING. SELECT OPTION 2 REVERSE SPAN FOR DRAGON c*rd

4 WRITE c*rd!

Thanks to Info from WaferWorld.


Martin
 

jimmyireland35

Regular Member
Joined
Jul 10, 2003
Messages
160
Reaction score
0
Points
0
Age
64
Website
Visit site
Can any one advise if the manhattan 6800 can support the dragon cam. I have followed the instruction as above but cannot get the cam to ooad
 
Top