- Joined
- Jul 2, 2005
- Messages
- 12,211
- Reaction score
- 12,282
- Points
- 113
- Location
- Epping Forest
- My Satellite Setup
-
OP Gibertini 100 XP+ Inverto Black Ultra Lnb
Superior Dark Motor (160° max)
(50 east to 45 west)
Octagon SX88+Optima (A/B switch) Edision primo IP S2
Raven 88cm Mesh Dish + IBU Twin output
Stab100 H to H (120° max)
(53 east to 45 west)
Octagon SX88+ Ultra HD (A/B switch) Golden Interstar Alpha_X
- My Location
- Epping Forest Essex
How to add active Multi-Stream TV to your Octagon SX-88
The Blind-Scan works fine for finding normal SD & HD transponders,
The SX-88 does not actually find Multi-Stream Transponders with the Blind Scan,
You can activate the current transponders for Multi-Stream that are in your database by making your 1st scan on a satellite with Multi-Stream selected,
How to do it:-
Go to instalations on the satellite that you want to scan then TP list & delete all dead transponders,
Now move to Antenna settings & press OK on the satellite you want to search,
Press the red search button,
Now select as follows in the sub-menu:-
Mode = Auto
Multi-Stream = On
FTA only = On
TV/Radio = TV
NIT Search = Off
Search = Press OK
After this just use the normal Blind Scan without activating the Multi-Stream in the scan to update your database,
If a new Multi Stream starts or a current one is missing from your database then add the data manually from here FlySat Sat List then follow the instructions in the sub-menu above.
The Blind-Scan works fine for finding normal SD & HD transponders,
The SX-88 does not actually find Multi-Stream Transponders with the Blind Scan,
You can activate the current transponders for Multi-Stream that are in your database by making your 1st scan on a satellite with Multi-Stream selected,
How to do it:-
Go to instalations on the satellite that you want to scan then TP list & delete all dead transponders,
Now move to Antenna settings & press OK on the satellite you want to search,
Press the red search button,
Now select as follows in the sub-menu:-
Mode = Auto
Multi-Stream = On
FTA only = On
TV/Radio = TV
NIT Search = Off
Search = Press OK
After this just use the normal Blind Scan without activating the Multi-Stream in the scan to update your database,
If a new Multi Stream starts or a current one is missing from your database then add the data manually from here FlySat Sat List then follow the instructions in the sub-menu above.
Last edited: