How to update an embedded cam ?

sami_bani

Regular Member
Messages
22
Likes
0
My Location
TUNISIA
#1
I have a FORTEC STAR 6000 with embedded MAGIC cam upgraded to MATRIX RELOADED 1.230 , is it possible to update the cam to MR 1.180 using a DUMMY CARD ( I didn't buy it yet )?? (in this case which prog I have to use ?)
 

Topper

Amo Amas Amant Admin
Staff member
Messages
21,542
Likes
3,243
My Satellite Setup
IDD CI24 ECONO MM Penta 1.20 Galaxy II
1.2Mtr Polar MTG yes it has been on the arc for 25 years and is now fixed on 13 East using two pairs of rusty molegrips. Unlike me they never groan but always perform.
My Location
Blackburn, Lancashire
#2
Sorry I cannot answer the question you are asking but surely what you have 1.23 is later than 1.18 so why do you want to downgrade???

I am sure the answer will be in the MR section of the forum
 

john_graydon

Specialist Contributor
Messages
2,219
Likes
3
My Satellite Setup
Azbox premium HD+,Dusty Dreambox 7000s,& Sky HD.
My Location
Dublin....Ireland
#3
sami_bani said:
I have a FORTEC STAR 6000 with embedded MAGIC cam upgraded to MATRIX RELOADED 1.230 , is it possible to update the cam to MR 1.180 using a DUMMY CARD ( I didn't buy it yet )?? (in this case which prog I have to use ?)
Hi
Yes you will need a matrix loader board and load the latest MR File into it, MR 1180 or MR 1170. Go to the clanzers website for a how to on it. Lets know if you have any problems. Do not use the magic cam board as it wont do.
 
Messages
29
Likes
0
My Satellite Setup
Digiquest 6700 embedded ucas rcvr /hotbird and Astra
My Location
Spain/southern
#4
I have a digiquest reciever with an embedded cam. When I look at the cam
on GUI it says 1.4.1.7. What type of cam and firmware do Ihave on this cam and is it even worth updating. I just ordered a cas 3 and mr. Thanks
 
Top