humax f2-green help

qussy10

Member
Joined
Dec 24, 2007
Messages
3
Reaction score
0
Points
0
Age
56
My Satellite Setup
repair sat
My Location
palestine
i need flash file for humax f2-green
the problem is the receiver works well while is on power, when it is put off the receiver willnot work again - it loses the the software.
the time indicator keep on the top.

what is the solution????

thanks
 

qussy10

Member
Joined
Dec 24, 2007
Messages
3
Reaction score
0
Points
0
Age
56
My Satellite Setup
repair sat
My Location
palestine
can some body help
 

Topper

Amo Amas Amant Admin
Staff member
Joined
Nov 18, 2004
Messages
23,512
Reaction score
3,797
Points
113
Age
66
My Satellite Setup
1.2Mtr Polar MTG yes it has been on the arc for 35 years and is now fixed on 13 East using two pairs of rusty molegrips. Unlike me they never groan but always perform.
My Location
Blackburn, Lancashire
qussy10 said:
can some body help

I think you have answered your own question as nobody has replied for a week, firstly the stb is quite old, secondly if what you say is correct then it sounds like the EEPROM has failed or supporting circuitry and whilst it can be flashed again, it will as you have already said lose all software and settings when powered down. Unless you are used to troubleshooting circuit boards it is doubtful that you could repair yourself and in reality it may be time to get something more modern. If it was mine I would be checking the circuit board for dry joints and failed electrolytic capacitors. The latter being the most likely source of the problem.
 

qussy10

Member
Joined
Dec 24, 2007
Messages
3
Reaction score
0
Points
0
Age
56
My Satellite Setup
repair sat
My Location
palestine
i said thank you for your goin i will do what you say and i will be back
thank you very very mach
 
Top