smaeg
Member
- Joined
- Feb 24, 2008
- Messages
- 1
- Reaction score
- 0
- Points
- 0
- Age
- 54
- My Satellite Setup
- 80cm dish + Mediaprice A+D
- My Location
- France
Hello:
The current that my dish motor + the LNB can consume (according to their specs) exceeds the maximum output current of my receiver (400mA).
Is there any standard device for increasing the DC power available over the antenna cable to the motor/LNBs?
Thank you in advance for any pointers.
PS: I could probably devise and make such a device myself, but the time + material would very likely exceed the cost of a standard solution - if it exists.
-- Andy
The current that my dish motor + the LNB can consume (according to their specs) exceeds the maximum output current of my receiver (400mA).
Is there any standard device for increasing the DC power available over the antenna cable to the motor/LNBs?
Thank you in advance for any pointers.
PS: I could probably devise and make such a device myself, but the time + material would very likely exceed the cost of a standard solution - if it exists.
-- Andy