Intermittent 'No Signal' message

[bren1916]

Hi,

I recently bought a Xoro Receiver and it installed first time - no problems (already have sky/dish etc so used that dish).
Day 2 I got a 'no signal' mesage and most of the time this is what I get after the box is turned on and Xoro logo appears on screen.
About 30% of the time I get all the channels no problm but I can't see why it drops the signal the rest of the time?
It's like all or nothing as I either have all channels or none.
Cable strength reads 100% so I'm thinking LNB port?
Box worked fine on sky feed in main room so ruled out the box.
Any suggestions much appreciated...

Thx,

Brendan.

 

[Lazarus]

Simple things first ........... check the connectors at both ends of the feed: Not making good enough contact; Making intermittent contact; etc.


Edit: For clarity, the Xoro is not a Freesat Receiver, but a generic FTA Receiver (HD), so I shall move your Thread out of the Freesat Forum to a more relevant one

 

[Lazarus]

........... and here it is in its new home - I've also Edited the Thread title to avoid confusion (There are some aspects of true Freesat Receivers that pose potential different answers to what seems to be the same question).

 

[bren1916]

Cheers - I'll do that check first..