• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

IS THIS THE 1 (Conax hacked)

Burnt Chips

Overclocker Supreme & General Mad B*st*rd
Messages
453
Likes
0
My Location
sunny manchester (i wish )
#1
Four years people have been waiting for some1 to release a hack for Conax. Now reports are abound with info on this.
Go to http://crypt.enjoy.joint.net and read.
also http://conax.host.sk/
You need a conax cam (not too sure if Freecam 2.019 will do)
and a seasons logger conected to your pc. Time will tell. DAVE.
 

malling

Regular Member
Messages
56
Likes
0
My Location
Midlands UK
#2
Yes I have this emulator but keep getting ATR Sent OK then Error receiving INS(0)=-1 twice then it just keeps doing the same thing over and over every 10 secs or so has anyone else read on any forum about this problem or had it themselves. My season interface is OK as I use Wallbanger on a regular basis.

My system is Windows 2000 + Manhattan 6800.

Malling. :(
 

Burnt Chips

Overclocker Supreme & General Mad B*st*rd
Messages
453
Likes
0
My Location
sunny manchester (i wish )
#3
Ive read in docs that if it dont work try different Baud rates, also Conax cam needed (not emulation) Mm, Freecam,Patch,
 

malling

Regular Member
Messages
56
Likes
0
My Location
Midlands UK
#4
I have an Irdeto Eurocam are u saying this perhaps will not work... my on-screen display on sat says Conax. I thought the eurocam supports conax?

Malling. :confused
 

Burnt Chips

Overclocker Supreme & General Mad B*st*rd
Messages
453
Likes
0
My Location
sunny manchester (i wish )
#5
Try and see, I would imagine every1s trying MMs Freecams, eurocams, Global cams, ETC: Only way is to try.I think Nagra cams
might??? as a few peeps have used conax cams to decode Hispsat (Nagra) the door might swing both ways.
 

2old4this

Honorary Admin
Messages
1,658
Likes
0
My Location
Cloud Cuckoo Land
#6
Yes, this is working. Opens all Conax channels at 1 degree West.

It runs under Linux from a bootable Linux (LCE) floppy.
Several reliable sources on other boards report they have had it up and running as of yesterday.
Needs a Conax3.03 or Conax 4.00e CI CAM and (non-powered) season interface. Some other CAM types (Viacces black, Aston103, Cryptoworks,....) can be converted to Conax.

Reported working on many different receivers, including:
Samsung patched 9500
Echostar 3000
Humax 5400, humax vaci
LG PVR 440
Nokia 9602, 9610, 9800, 9802
Force 1155s, 1199
Canal+ Phillips rental

Other proggies are also now appearing, including a program to extract working keys from a Conax MOSC.

2old
 

wolsty

"Satellite Expert"
Messages
787
Likes
3
My Satellite Setup
VU+ Duo, Humax IRCI5400z, Sony Bravia KDL-32EX403, 1.1m Triax, Technomate TH-2600 DiSEqC mount, Sony BDV-E280 Home Cinema system, ancient Logik Freeview PVR.
My Location
Kernow
#7
Excellent news, but it begs some big questions.

Is the hack likely to become available for smartcards? Is it possible that there will be a new patch for the Humax 5400? I'm sure there's lots of us (particularly Humax and Funcard/DS9 users who'd like to know.

:) :) :) :) :)
 

Channel Hopper

Suffering fools just so you don't have to
Staff member
Messages
23,931
Likes
4,982
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK South East
#8
Not sure if anyone has found out, but on other sites there are claims it alrerady works with the Humax 5400 without the CAM, so there should be no reason to patch it again

As for cards, whilst its great to have more channels, those that have already seen the results withthe interface are now saying this should be left alone (or at least left to those supplying the Dream cards) as the whole of Scandinavian satellite entertainment could collapse
 

wolsty

"Satellite Expert"
Messages
787
Likes
3
My Satellite Setup
VU+ Duo, Humax IRCI5400z, Sony Bravia KDL-32EX403, 1.1m Triax, Technomate TH-2600 DiSEqC mount, Sony BDV-E280 Home Cinema system, ancient Logik Freeview PVR.
My Location
Kernow
#10
Never got round to it BC. I can't afford a Dream Card and, since there was no public domain hack of C*nax, there didn't seem to be much point.

It may be better left alone CH, but I can't see it happening. Someone is bound to break ranks on this and publish the files.

:)
 

Burnt Chips

Overclocker Supreme & General Mad B*st*rd
Messages
453
Likes
0
My Location
sunny manchester (i wish )
#11
I messed about for about 20 weeks altogether, I managed to get the Cam to initialise but could never get a piccy. C H is kindly letting me have a Season, So after all the searching its there
in front of me but can`t touch (until the season arrives) which will be tomoz now. Its like having Meg Ryan stripped on the bed in front of you, and some *****s stuck boxing gloves on yer, and shrink wrapped your todger up. Frustrating (just a little). DAVE.
 

Channel Hopper

Suffering fools just so you don't have to
Staff member
Messages
23,931
Likes
4,982
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK South East
#12
Sent out first class on Thursday M8, should have been with you Friday

Let me know if it arrives later today
 

Burnt Chips

Overclocker Supreme & General Mad B*st*rd
Messages
453
Likes
0
My Location
sunny manchester (i wish )
#13
Not yet but the post in manchester is shite (all the posties have gotta rummage through it to see if its useablr to them) DAVE
 

2old4this

Honorary Admin
Messages
1,658
Likes
0
My Location
Cloud Cuckoo Land
#15
no, the Magic CAM does not support Conax (maybe a future version of pentacrypt will, but 109 doesn't).

2old
 

Channel Hopper

Suffering fools just so you don't have to
Staff member
Messages
23,931
Likes
4,982
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK South East
#16
I may have been mistaken, unless someone can confirm differently, the Humax 5400 does not support Conax without a Conax CAM

It may have been a Conaxis file to fool the patched receiver with a DS9 card set up for Nagravision, but then again I believe this requires a version 4 Conax CAM
 

wolsty

"Satellite Expert"
Messages
787
Likes
3
My Satellite Setup
VU+ Duo, Humax IRCI5400z, Sony Bravia KDL-32EX403, 1.1m Triax, Technomate TH-2600 DiSEqC mount, Sony BDV-E280 Home Cinema system, ancient Logik Freeview PVR.
My Location
Kernow
#17
Very recent postings on other boards seem pretty emphatic that the patched Humax does not (yet) support Conax. I doubt if it will be long ere the patch appears, though.

:) :)
 
P

PipiSATTV

Guest
#18
For all Pc DVB-s card users there is a conax.dll
file that works with Progdvb nad DVBXtreme for Canal+!
Kioque is however black for now!
h**p://multidec.host.sk/en/softcam.html
 

Channel Hopper

Suffering fools just so you don't have to
Staff member
Messages
23,931
Likes
4,982
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK South East
#19
Reports out now that patched Humax users can use simply an interface and PC, no cam needed
 

rolfw

Believe it when I see it Admin.
Staff member
Messages
37,617
Likes
1,254
My Satellite Setup
See signature
My Location
Berkshire
#20
It has been posted on a forum that it also is OK with the 2.019 Freecam as well.