IS THIS THE 1 (Conax hacked)

[pixey]

Originally posted by Channel Hopper
Reports out now that patched Humax users can use simply an interface and PC, no cam needed

I am using a patched Humax CH, so what do I need to get co*ax working??

pixey

 

[Channel Hopper]

Allegedly any ConaxEmulator version later than 1.8

The site posted by Burnt Chips at the top of this thread has releases everyday

Let us know if it works for you

 

[Aistys]

what about Humax 5300

 

[PipiSATTV]

NOW EVERYTHING IS LIGHT!

An upgrade of conax-ci.dll on:

h**p://www.esaee.com/uploads/index.php

opens even Kiosque PPV!

 

[bollywood]

Originally posted by rolfw
It has been posted on a forum that it also is OK with the 2.019 Freecam as well.

will it work on a 2.018 i have nokia 9699 INMIT software

 

[pixey]

is the season 2 interface suitable with the mentioned emulator?

pixey

 

[psats]

yes conax on hummy with ver 22 software 100 okO-Ha <@> )(-)(

 

[psats]

O-Ha

 

[Channel Hopper]

There are reports that the Humax dierct connection requires changing channels between PPV movies to restart the process of decryption

Since the Kiosk and Palco PPVs are all continuous replays of the same movie (with the exception of Kiosk 9, 10 , and 11 with revolving mature content), I assume the system falls over when watching more then 2 hours worth of the stuff, by which time failing eyesight might also be an issue

 

[Pligs76]

Been waiting for this for a long time. Compliments to the brains out there figuring it out

On another note, I never used a seasonal interface. Anyone know a link to a step-by-step instruction on how to use it and which software to load etc. etc.

Cheers
Pligs76

 

[Burnt Chips]

PLIGS heres a step by step instruction of useing you season for Conax, If its gets too techy mail me.
1. SHUV season into Conax cam/ patched reciever (pins up)
2. connect a 9 pin serial cable from pc to season interface
3. make a bootable floppy disk with program at link above
4 reboot pc (if done 3 correctly) floppy will boot in Linux
5. swing sat too Thor
6. ( and watch) , if any real probs
(like baud rate speed) it wont start but other than that its that simple.

 

[Pligs76]

Cheers B.C.

That's all I needed to know. Now just got to get hold of the right Seasons Interface which I understand should needs to be powered only if you are using Co*ax CAM??

Pligs

 

[Burnt Chips]

nope pligs ! the 1 i use aint powered ! ver 3.03 cam.

 

[pixey]

Just to let you know, CH, I got my season interface back from a friend of mine - something that I bought about 8 years ago that came with some Voyager software that I never managed to get working, made myself a linux boot disk as described earlier, plugged the season into my patched Humax 5400, no Co*ax cam, and bingo, worked first time.
I have watched 2 films on kio*k and 2 footy matches and it is very, very stable.
Well done to all involved - what an achievement.

pixey

 

[Pligs76]

After 2 late nights in a row without any result, I need some advise / ideas.

Got my Season 2b, booted in Linux (tried both lce.img (dated 28.sep01) and the lce22.img (dated 06.jan.03).

Try to connect through both embedded C'nax CAM (Force) and CI (version 3.03)

Have played around with the baud rates(8861, 9000, 9600 etc) and even parity.

I know the COM port (com1) and cable is correct but how can I check whether it is really connecting? Message on the TV is first "card ok" then shortly after "unable to decode signal".

Who got it working on above equipment and what settings have you used?

Pligs - the ponderer

 

[psats]

i have force 1122 i just changed the baud to 9600. have to reset card sometimes. good luck

 

[Pligs76]

Thanks Psats,

Finally got it working with 9600 bps but only on a Conax CI (version 3.03).

Couldn't get it working with the embedded Conax CAM on my Force 1030. Have lowered the speed down to 8861 bps, still without result. Anybody got that working and at what setting??

Pligs - the enlightend

 

[wolsty]

Got the Season on order. Got the pc alongside the tv and stb. Got the serial cable. Got the software. Got the floppy. Got my wife's permission to clutter the living room with hardware. What I need to know is: what bios/operating system modifications do I need to make if I'm to run the pc just as a black box, without monitor, keyboard and mouse?

 

[psats]

if you haye 5400 new ver for windows O-Ha pm your addy or get it from the dudez or toes its from MR DUDE

 

[Burnt Chips]

Youve not got a conax cam then, The emulator program has Linux
built into it, So if you copy the "lce" to a floppy disk with Diskwrite it will make the disk a linux bootable disk, with the emu program running as well, In theory you dont need a Pc juat a powered floppy Disc drive, as all the works done on the disc, Theres also a program
(on the dudez) which creates a Virtual H drive on your HD, Whatever OP sys you use, I use this so i can go on the net and still have conax (crunchin away) DAVE