just TPS

Messages
20
Likes
0
My Satellite Setup
Digital 4100ci, fortec 5100 ultra, Technomate 1500CI, geotrack motor, 110cm dish+0.2 lnb
My Location
leeds, uk
#1
can somebody point me to the right direction. my friend has a lifetime classic new and has his dish point at hotbird. he just wanna watch tps package. not worried about polsat but just a bin file to watch tps. can anybody helps
many thanks
 

Topper

Amo Amas Amant Admin
Staff member
Messages
21,726
Likes
3,310
My Satellite Setup
IDD CI24 ECONO MM Penta 1.20 Galaxy II
1.2Mtr Polar MTG yes it has been on the arc for 25 years and is now fixed on 13 East using two pairs of rusty molegrips. Unlike me they never groan but always perform.
My Location
Blackburn, Lancashire
#2
Why not flash your technomate with a Darkman Patch from Alsat?

EDIT 2nd thoughts dont...why not read the post properly Doh
 

frund

Specialist Contributor
Messages
279
Likes
0
My Satellite Setup
triax 1.1 tm 1500ci+ dm patch. Moteck 2100. Intel 4300 based pc . LG7500. 32" lcd
My Location
Wales. UK.
#3
Morning, if it is just a free to air reciever you cant do a lot with it just manufacturers updates. He will need to go down the Encryption route.:D
 

Rob

Regular Member
Messages
1,397
Likes
3
My Satellite Setup
Technomate TMS-1500 CI+ "patched" receiver, 90cm p/f 36v motorised dish, Inverto C120 0.3db LNB, Moteck V-Box 2, Packard Bell 6052 XP Home computer, Toshiba A60 laptop, and lots of Russian Vodka !
My Location
Essex
#4
The Fortecstar Lifetime Classic is a Korean made receiver mainly for the North American systems. Check that the voltage is 240 volts and not the 100-120 volts used in North America.

This FTA receiver can be upgraded by using official software with a null-modem lead connecting your PC and receiver, but if you want the TPS channels you will have to look through the web for a site that provides "patches" for them.
You might be lucky but I don't really fancy your chances, hope I'm wrong.
 
Messages
20
Likes
0
My Satellite Setup
Digital 4100ci, fortec 5100 ultra, Technomate 1500CI, geotrack motor, 110cm dish+0.2 lnb
My Location
leeds, uk
#5
i have updated it from al7bar website and it worked fine but then tps changed its system and the new bin file available @ al7bar is working fine with D+ and polsat but tps was broken. my mate has a fixed dish on hotbird so d+ no good for him and plus he is french so the french stuff there interests him more than anything
 
Messages
18
Likes
0
#6
donpely said:
can somebody point me to the right direction. my friend has a lifetime classic new and has his dish point at hotbird. he just wanna watch tps package. not worried about polsat but just a bin file to watch tps. can anybody helps
many thanks
you have to many stored messages cannot post any help.
 

Rob

Regular Member
Messages
1,397
Likes
3
My Satellite Setup
Technomate TMS-1500 CI+ "patched" receiver, 90cm p/f 36v motorised dish, Inverto C120 0.3db LNB, Moteck V-Box 2, Packard Bell 6052 XP Home computer, Toshiba A60 laptop, and lots of Russian Vodka !
My Location
Essex
#7
donpely said:
can somebody point me to the right direction. my friend has a lifetime classic new and has his dish point at hotbird. he just wanna watch tps package. not worried about polsat but just a bin file to watch tps. can anybody helps
many thanks
Have a look in the Cards, Programmers, and CAMS section, then go to X-Cam, Ultracam, Dragon Cam Section.
Look at thread "Anyone using T-Rex on Fortecstar" and go to posts 11, 12, and 13, plus.
 
Top