Kaon KSC-100 MCO original software

A

asharaf

Member
Messages
4
My Satellite Setup
satellite receiver service
My Location
india
i have a DishTV package with KAON KSC-100 MCO. I dont like to use card for the same. Can u help me to get the original software for KAON ksc-100 mco original software as it is first installed before updated by DishTV.
If i get the original software and down load it to receiver,i can view normal free to air channel. Plz help me to download the same.
 
Lucas

Lucas

Specialist Contributor
Messages
2,258
My Satellite Setup
Dreambox7020
My Location
Mars
Hi, you need first know the HW version, you can see it in Menu>System Setings> Information, or some thing closer to it.
You can get the original firm here.

_www.sat.us.pn (firm original)
or
_http://www.kaonmedia.net/eng/customer/customer_download_view.php
 
A

asharaf

Member
Messages
4
My Satellite Setup
satellite receiver service
My Location
india
Can u help me to find out the software

This is my receiver details

Loader Version: - 2.1.6
H/w: - 01.00
S/w: - 01.05.00
Model name: - KSC-100 MCO

SYSTEM RESOURCES:-
Flash Memory: - 2 Mbyte
SDRAM: - 16Mbytes
Main CPU MPEG Chip: - STi5518

TUNER
SHARP
Frequency range: - 950MHZ-2150MHZ
Symbol Rate: - 2-45Mbaud
Demodulation: - QPSK
Input Connector: - F type female (75 ohm)
Fec Mode Rate: - ½, 2/3, 3/4, 5/6, 7/8.

OTHER
Integrated CONAX + one blank CI Module.
Memory: - 39VF 1602 (from SST)
 
acetatus

acetatus

Specialist Contributor
Messages
250
My Satellite Setup
hispa30º..hot13º..astra19.2º
kaon 230
DM500s
My Location
Algures
is the HW version complete?
HW version on kaon models usualy is XX.XX.XX
 
A

asharaf

Member
Messages
4
My Satellite Setup
satellite receiver service
My Location
india
Thank You for your reply, hardware version i have mentioned is correct which is .
I know that the Hardware version is usually in the format XX.XX.XX
But for this specific model [only for DishTV package] is different.
Some one having the backup of original can only help, i think.


The following is the receiver log when it boot

AVMEM SIZE = = = = 100000ST


STAVMEM_Init()=OK_MCHAN]= EXIST
STAVMEM_CreatePartition()=OKC] Version : 02.02.05 Last
STEVT_Init()=OK.27
STPWM_Init()=OK
STCLKRV_Init(CLKRV0)=OK294
STI2C_Init(back)=Ok_Init] SFBUFFER_Ini
STI2C_Init(front)=Ok
DECN_Init()=OK
STFLA
VTG_Init()=OKs!!)=
STVID_Init(VID0)=driver changed at 3 April 2003=Ok

ManufactCode=0xbf, DeviceCode=0x234a
OSD_Initialize=(OK)



==============================================
Version 2.1.6 v1
Date Apr 01 2005, Time 23:04:21
NO MICOM : [EuroLoader - Sat384] 1/2M !
==============================================

[FE] Version : 02.03.00 Last Update :
gIS_LEDFront = 2
___C_1 Detected !!! gIS_LEDFront= 2, gHEAD.mcVideoInvert = 1
HWC_VideoInvert(1)
[0], CH_ADDR[0xc0182cc4], CH_IDX[15], TUN_ADDR[0xc0082c90], TUN_IDX[0]
BOOTLOADER :: TS SERIAL = 0
[REREADCLOCK] 0-0-0, 0: 0. 0
FLASH ID: 0x234a, COM ID: 0x00bf
sdVerifyMasterOrSlaveThroughPC() = 1
NO_ACKNOWLEDGE w
nvram_read_ds_info() scan info err
___ V300 BOARD DETECTED !!!!
Hdl->mcChanType = [0x0c]
Hdl->mcTuneType = [0x89]
[0x00] SHARP 0614 Is detected !!!
Hdl->mcChanType = [0x0c]
Hdl->mcTuneType = [0x89]
FE_GetTunerName(0) = ZL10
FE_GetTunerName(1) = ZL10
HW OUI:0008b9 mdl=0x2802 ver=0x0100 msk=0x0000
SW OUI:0008b9 mdl=0x2802 ver=0x0213 msk=0x0fff
*jumpCode = 0x78400300
gFLASH_BASE = 0x7fe00000
Jump : 0x7feffffe
STI2C_Init(back)=Ok
STI2C_Init(front)=Ok
STFLASH_Init(Success!!)
STFLASH_Open(Bank0)=Ok
STFLASH_GetParams
FLASH_GetParams()=

ManufactCode=0xbf, DeviceCode=0x234a
ManufactCode=0xbf, DeviceCode=0x234a

STFLASH_Term(Bank0)=Ok
Flash setup Ok (512 blocks)
STFLASH_Init(Success!!)
STFLASH_Open(Bank0)=Ok

################# LAS TEST ####################
Date Apr 25 2007, Time 19:15:22
CPU Clock Speed = 81000000
################################################

SetPort4 = 0::SetPort4 = 1:: THIS IS LOCOST NORMAL FRONT !!!
Wait..............................
CAS Verifier Search...............


=======================================================================
CAS Verifier OTV Area Search.......Start(0x101000)........
=======================================================================
CAS Verifier OTV Area Search :: Find in CAS_VERIFIER BOTH BLOCK....
=======================================================================
###casVerifier_OTV_area_search :: Aleady Moved in OTV area!!!...

----- uncompress start -----
binary_on_ram[0~3]=[0x0,0x9,0xcd,0x23]
srcLeng=0x9cd23[642339]
uncompress OK
----- uncompress end ----- length=1228800
Jump : 0xc01837fe
STUART0_Close(7).
STUART0_Term(6).


STAVMEM_Init()=OK
STAVMEM_CreatePartition()=OK
STEVT_Init()=OK
STPWM_Init()=OK
STCLKRV_Init(CLKRV0)=OK
STI2C_Init(back)=Ok
STI2C_Init(front)=Ok
STCLKRV_Open(CLKRV0)=OK
STAUD_Init(AUD0)=Ok
STDENC_Init(DENC0, InvOut 0)=OK
STVTG_Init(VTG0)=Ok
STVID_Init(VID0)=Ok
[FE] Version : 02.04.03 Last Update : 2005.09.20
SetPort4 = 0::SetPort4 = 1:: THIS IS LOCOST NORMAL FRONT !!!
DUO_DetectChannel(0, 2, ZL10, 1):DVB_S_3 = OK
[REREADCLOCK] 1970-1-1, 0: 0. 1
I2C[I2C_E2P_0]= EXIST
I2C[I2C_RFMOD]= EXIST
I2C[I2C_MTUNE]= EXIST
I2C[I2C_MCHAN]= EXIST
[MC] Version : 02.02.05 Last Update : 2004.10.27
bufferTop : c02a1294
[DEMUXDRV, SFBUFFER_Init] SFBUFFER_Init SUCCESS !!!
STFLASH_Init(Success!!)=
FLASH_GetParams()=

ManufactCode=0xbf, DeviceCode=0x234a
ManufactCode=0xbf, DeviceCode=0x234a

Flash setup Ok (512 blocks)
STFLASH_Init(Success!!)=
[0x00] SHARP 0614 Is detected !!!
decoder_hard_init_1.........
[CONAX] Version:3.1.3, Last Update:05.02.04
decoder_hard_init_2........
ram_fsys_init(), success......
casX_INIT ::::
[CONAX] Initialize complete
decoder_hard_init_3() ..........
####### CI DETECT #######
####### OLD BOARD #######
[CI] Version : 02.02.03 Last Update : 2005.05.23
hibl_app_init

hibl_get_eurostate(0xA0)
**************************************
DB_FlashReadSms
**************************************
GetData checkSum 131a295, buf 0
MISMATCH !!! checkSum 131a295, buf 0
 
A

asharaf

Member
Messages
4
My Satellite Setup
satellite receiver service
My Location
india
i am Sorry to say a mistake in hardware version
oringinal configuration is as follows

Hardware version is 00.01.00
Software version is 00.21.06



Thanks
 
P

psidarad

Member
Messages
1
My Satellite Setup
KAON KSC-100, WRT54G-V3-DDWRT
My Location
India
My first post..
If somebody could tell me the procedure to copy the firmware from my STB, I am ready to provide upload it here. I have KAON KSC-100. It will be with me only for today.
 
Topper

Topper

Amo Amas Amant Admin
Staff member
Messages
22,835
My Satellite Setup
IDD CI24 ECONO MM Penta 1.20 Galaxy II
1.2Mtr Polar MTG yes it has been on the arc for 25 years and is now fixed on 13 East using two pairs of rusty molegrips. Unlike me they never groan but always perform.
My Location
Blackburn, Lancashire
psidarad said:
My first post..
If somebody could tell me the procedure to copy the firmware from my STB, I am ready to provide upload it here. I have KAON KSC-100. It will be with me only for today.
Upload it here and you are on an instant ban, did you not read the rules?, if you want to make it available to other members post it on sendspace or somewhere similar and post a none live link which begins with _http://
 
F

fak

Member
Messages
1
My Satellite Setup
Currently Asiasat3 but looking forward for hotbird or Nilesat.
My Location
Pakistan
Hi, I have too, same Kaon KSC-100 receiver. Can somebody tell how can i change its software and make it original?
 
Top