Kaon Receiver For Dish Tv

Foxtell

Regular Member
Messages
37
Likes
0
My Satellite Setup
ONE SDS( STAR DIGITAL SERVICE) & ONE DISH TV.
My Location
Nepal
#1
Any information about Kaon Receiver, Now DISH TV are providing Kaon Receiver Model KSC-100 for INDIA Viewers.... HELP.:-comp
 
Messages
2
Likes
0
My Satellite Setup
hello
#2
Foxtell said:
Any information about Kaon Receiver, Now DISH TV are providing Kaon Receiver Model KSC-100 for INDIA Viewers.... HELP.:-comp
hello bro ow r u .....bro i need master code 4 ksc-100.......i think u can help me ......thanx in advance
 

mhku

Super Moderator
Staff member
Messages
4,712
Likes
20
My Satellite Setup
TM Nano ~ sg2100
My Location
Midlands
#3
_http://www.satellite-heaven.de/kaon/index.htm
 

Foxtell

Regular Member
Messages
37
Likes
0
My Satellite Setup
ONE SDS( STAR DIGITAL SERVICE) & ONE DISH TV.
My Location
Nepal
#4
mhku said:
_http://www.satellite-heaven.de/kaon/index.htm
Thax for right reply, but sorry there is no any currect information for that model.........

Unknown H/W Unknown H/W2M?MKaon KSF/KSC-100EchosatX-5CIManhattan Plaza 1100 SKaon KSF- H230Xtreme XSF-550 FTAKaon KSF-(V)200 CX/ SCOKaon KPSF-200 SKaon KSF-V200 SKaon KSC-360Kaon KSF-360 MKaon KSC-V370 K/ CX
 

ppsingh05

Regular Member
Messages
15
Likes
0
#5
Foxtell said:
Thax for right reply, but sorry there is no any currect information for that model.........

Unknown H/W Unknown H/W2M?MKaon KSF/KSC-100EchosatX-5CIManhattan Plaza 1100 SKaon KSF- H230Xtreme XSF-550 FTAKaon KSF-(V)200 CX/ SCOKaon KPSF-200 SKaon KSF-V200 SKaon KSC-360Kaon KSF-360 MKaon KSC-V370 K/ CX
I have kaon ksc100 dsr.I want open all dish channel without any smart card.Please send me any patch software.
my email id: ppsingh05@yahoo.co.in
 

TR KHAN

Regular Member
Messages
41
Likes
0
My Satellite Setup
SERVICE
#8
lokesh said:
I have updated receiver given by dishtv kaon to ksf 500z enjoy....

sorry lokesh,
what do you mean by ksf 500z, i tried but .....

COM1 Connected !
-. Target loader version :L 216
-----------> Front :: 74HC164 used (connector: 14pin)
-----------> Target 2M Flash.
-----------> Target SST FLASH-2M (39VF1602 Bottom).
STB normal start.
[ Upgrade mode. ]
""
File open error, please open file first!
COM1 Off !!! ("Enter" key to reconnect.):confused
 

TR KHAN

Regular Member
Messages
41
Likes
0
My Satellite Setup
SERVICE
#9
Sunny AT-1030DCIA (Sky)(Z)

s/w v 02.00.05 Last update Apr 20 2004, CA 2.2.1, Sunflower Menü alt

Utility: 6 Games (Tetris, Hexa, Puzzle, Mine, Snake, Sokoban), Kalender, Zoom, @sky video link,

Freeze, Programmsperre v5.8.19, Toneburst,

Infobanner noch ohne PMT, SID und mit now/ next Info mit Details,

crypts blinken stehen aber nicht im Infob., 8 Favoriten + Genre, TV Liste 7 Sender pro Seite

s/w v 02.00.04 Last update Mar 19 2004, CA 2.2.1, Sunflower Menü alt

Utility: 6 Games (Tetris, Hexa, Puzzle, Mine, Snake, Sokoban), Demo, Kalender, Zoom, @sky video link,

Freeze, Programmsperre, Toneburst,

Infobanner noch ohne PMT, SID und mit now/ next Info mit Details,

crypts blinken stehen aber nicht im Infob., 8 Favoriten + Genre, TV Liste 7 Sender pro Seite

s/w v 02.00.04 Last update Feb 23 2004, CA ?, Sunflower Menü alt

Utility: 4 Games (Tetris, Hexa, Puzzle, Snake), Demo, Kalender, Zoom, @sky video link,

Programmsperre, Toneburst,

Infobanner noch ohne PMT, SID und mit now/ next Info mit Details,

crypts blinken stehen aber nicht im Infob., 8 Favoriten + Genre, TV Liste 7 Sender pro Seite

s/w v 02.00.04 Last update Jan 29 2004, CA 2.1.9, Sunflower Menü neu

Utility: 4 Games (Tetris, Hexa, Puzzle, Snake), Demo, Kalender, Zoom, @sky video link,

Freeze, Programmsperre, Toneburst,

Infobanner noch ohne PMT, SID und mit now/ next Info mit Details,

crypts blinken stehen aber nicht im Infob., 8 Favoriten + Genre, TV Liste 7 Sender pro Seite

s/w v 02.00.03 Last update Dec 19 2004, CA 2.1.9, Sunflower Menü alt, Bootlogo

Utility: 7 Games (Tetris, Hexa, Puzzle, Slider, Mine, Snake, Sokoban), Demo, Kalender, Zoom, @sky video link,

OTA, Toneburst, Menüsperre lässt sich nicht ausschalten

Infobanner noch ohne PMT, SID und mit now/ next Info mit Details,

crypts blinken stehen aber nicht im Infob., 8 Favoriten + Genre, TV Liste 7 Sender pro Seite

Das selbe auch mit:

S/w v 02.00.03 Last update Nov 13 2003, CA 2.1.9

S/w v 02.00.02 Last update Sept 27 2003, CA 2.1.9
 

Attachments

lokesh

Regular Member
Messages
183
Likes
0
#10


ALL ABOUT KAON RECEIVER


Friends, I required some genuine help from all of you. I have put up my receiver into serious trouble. I have a KAON receiver from www.kaonmedia.net I have purchased this receiver to use legal service from DISHTV INDIA (www.dishtvindia.com). Although the receiver make and model is similar to ‘KAON KSF 100 CO’ but its hardware and software version have been modified and it shows the following version.

Loader version: - 2.1.6

H/w: - 01.00

S/w: - 01.05.00

Model name: - KSC-100 MCO. (The model name I think probably have been changed)



Actually I have crashed the receiver software. I tried to reload the software but didn’t find any matching software. Lastly I got angry and updated my receiver with KSC-511Z

H/w: - 12.05.A5

Using the loader called KUP230 in engineering mode. Finally my receiver started. Everything is working fine except one great problem. I AM NOT GETTING ANY SIGNAL. One important thing I noted is that, I can see a flashing logo of ‘CROSSED DISH ANTENNA’ on left top of my TV screen.



Another important thing is that I might have damaged my receiver’s serial number and U/A number during all this up gradation. Without this I cannot watch my legal subscription.



Now I have opened up my receiver and carefully noted each and every hardware to get help from all you friends. I am providing all these details below.



Loader Version: - 2.1.6

H/w: - 01.00

S/w: - 01.05.00

Model name: - KSC-100 MCO



SYSTEM RESOURCES:-

Flash Memory: - 2 Mbyte

SDRAM: - 16Mbytes

Main CPU MPEG Chip: - STi5518



TUNER

SHARP

Frequency range: - 950MHZ-2150MHZ

Symbol Rate: - 2-45Mbaud

Demodulation: - QPSK

Input Connector: - F type female (75 ohm)

Fec Mode Rate: - ½, 2/3, 3/4, 5/6, 7/8.



OTHER

Integrated CONAX + one blank CI Module.

Memory: - 39VF 1602 (from SST)



After up gradation to KSC 511Z

H/w: - 12.01.A5

S/w: - 02.00.00

Ca: - 2.2.2



Friends, please help me to get out of this situation. The service is not accepting the receiver due to self alteration and demanding very much. So, please tell me which software will work with my model and how can I get Serial number and U/A number of my receiver back.

Please provide a genuine help. I will also send the same text to KAONMEDIA help desk.

Hoping for a positive reply soon.

Good day..





 

TR KHAN

Regular Member
Messages
41
Likes
0
My Satellite Setup
SERVICE
#11


Kaon KSC-100: DVB-S, 4080 Ch., Common Interface
Please help we need loader for that model.
 

TR KHAN

Regular Member
Messages
41
Likes
0
My Satellite Setup
SERVICE
#12
lokesh said:
ALL ABOUT KAON RECEIVER



Friends, I required some genuine help from all of you. I have put up my receiver into serious trouble. I have a KAON receiver from www.kaonmedia.net I have purchased this receiver to use legal service from DISHTV INDIA (www.dishtvindia.com). Although the receiver make and model is similar to ‘KAON KSF 100 CO’ but its hardware and software version have been modified and it shows the following version.

Loader version: - 2.1.6

H/w: - 01.00

S/w: - 01.05.00

Model name: - KSC-100 MCO. (The model name I think probably have been changed)



Actually I have crashed the receiver software. I tried to reload the software but didn’t find any matching software. Lastly I got angry and updated my receiver with KSC-511Z

H/w: - 12.05.A5

Using the loader called KUP230 in engineering mode. Finally my receiver started. Everything is working fine except one great problem. I AM NOT GETTING ANY SIGNAL. One important thing I noted is that, I can see a flashing logo of ‘CROSSED DISH ANTENNA’ on left top of my TV screen.



Another important thing is that I might have damaged my receiver’s serial number and U/A number during all this up gradation. Without this I cannot watch my legal subscription.



Now I have opened up my receiver and carefully noted each and every hardware to get help from all you friends. I am providing all these details below.



Loader Version: - 2.1.6

H/w: - 01.00

S/w: - 01.05.00

Model name: - KSC-100 MCO



SYSTEM RESOURCES:-

Flash Memory: - 2 Mbyte

SDRAM: - 16Mbytes

Main CPU MPEG Chip: - STi5518



TUNER

SHARP

Frequency range: - 950MHZ-2150MHZ

Symbol Rate: - 2-45Mbaud

Demodulation: - QPSK

Input Connector: - F type female (75 ohm)

Fec Mode Rate: - ½, 2/3, 3/4, 5/6, 7/8.



OTHER

Integrated CONAX + one blank CI Module.

Memory: - 39VF 1602 (from SST)



After up gradation to KSC 511Z

H/w: - 12.01.A5

S/w: - 02.00.00

Ca: - 2.2.2



Friends, please help me to get out of this situation. The service is not accepting the receiver due to self alteration and demanding very much. So, please tell me which software will work with my model and how can I get Serial number and U/A number of my receiver back.

Please provide a genuine help. I will also send the same text to KAONMEDIA help desk.

Hoping for a positive reply soon.

Good day..
How foolish you are without backup you did it..... rubbish.)(-red
 

lokesh

Regular Member
Messages
183
Likes
0
#13
please advise something. u can say me foolish. any way please tell how can I take backup. which software according to u will work?
 

lokesh

Regular Member
Messages
183
Likes
0
#15
ok Mr TrKhan sir, can u provide me the original software used by dishtv for kaon receiver so that atleast I can bring back the original menu back. Or any one else can provide please.
my email lk_pat@yahoo.com
 

Tom Robert

Regular Member
Messages
155
Likes
0
#16
I have new and updated software of Loader Version: - 2.1.6, H/w: - 01.00,S/w: - 01.05.00 for Model - KSC-100 MCO fully workable for Dish TV same as I firstly got updated software of ZENEGA than anyone.
 

TR KHAN

Regular Member
Messages
41
Likes
0
My Satellite Setup
SERVICE
#17
lokesh said:
please advise something. u can say me foolish. any way please tell how can I take backup. which software according to u will work?
TOM ROBERT will help you i think he has loader. if you send me your STB no i will try my best. :-rub
 

lokesh

Regular Member
Messages
183
Likes
0
#18
can u provide me this software tom. please.
after updating to 511z I am getting a crossed dish antenna logo flashing on left top of my tv screen
my standby button on receiver is not working and my led in front panel displays 8. .8.8 in stand by mode

please help. thanks
 

lokesh

Regular Member
Messages
183
Likes
0
#19
ok friends, here I am giving some information about conax CA for kaon ksc100mco receivers.
software version:- 03.01.03
interface version:- 0x40
no. of session:3
language:- 2c
ca-sys-id:- 0x0B00
 

lingaraj_h

Regular Member
Messages
24
Likes
0
My Satellite Setup
Dish TV Receiver's Zenega CD1002s and Kaon with DiSEqC on NSS6-95"E ,Panamsat12-45"E and Insat 2E0-83"E
My Location
Karnataka,India
#20
Tom Robert said:
I have new and updated software of Loader Version: - 2.1.6, H/w: - 01.00,S/w: - 01.05.00 for Model - KSC-100 MCO fully workable for Dish TV same as I firstly got updated software of ZENEGA than anyone.
How can i Remove rebooting
 
Top