$ky card and camd3?

mhku

Super Moderator
Staff member
Messages
4,712
Likes
20
My Satellite Setup
TM Nano ~ sg2100
My Location
Midlands
#1
I've got a yellow house card and currently use camd3.

Do I need to use newcamd to get it working i.e. only newcamd works? If not, how do I do it?

Thanks :)

I edited betad.cfg, cardserv.cfg, cardserver.cfg in /var/tuxbox/config/enigma/ to be:

SERIAL_PORT = 0
TCP_PORT = 10000
BOXID = 0000000000
EMM-G = yes
EMM-S = yes
EMM-U = yes
SPECIAL_FEATURES = no
DISABLE_PIN = yes

Have installed newcamd and set it as the default cam for Channel 4.

Have I missed something? Do I need to leave the card in the slot with newcamd running to activate it?

:(
 

mhku

Super Moderator
Staff member
Messages
4,712
Likes
20
My Satellite Setup
TM Nano ~ sg2100
My Location
Midlands
#2
do I have to have 1k posts before someone will tell me?

;)
 

john_graydon

Specialist Contributor
Messages
2,219
Likes
3
My Satellite Setup
Azbox premium HD+,Dusty Dreambox 7000s,& Sky HD.
My Location
Dublin....Ireland
#3
Yes mark it works with newcamd. Edit the file with ultra edit. I find that if you load a new image and start again works fine. Very touchy when you edit it a couple of times. I have the 2 files if you need them.
 

mhku

Super Moderator
Staff member
Messages
4,712
Likes
20
My Satellite Setup
TM Nano ~ sg2100
My Location
Midlands
#4
Does it work with newcamd-betad 6.07? Any chance that you could send me the files?

:)

Thanks.
 

john_graydon

Specialist Contributor
Messages
2,219
Likes
3
My Satellite Setup
Azbox premium HD+,Dusty Dreambox 7000s,& Sky HD.
My Location
Dublin....Ireland
#5
mhku said:
Does it work with newcamd-betad 6.07? Any chance that you could send me the files?

:)

Thanks.
Sorry Mark thought you got them. Sent them again to you. Yes it does work with 6.07
 

mhku

Super Moderator
Staff member
Messages
4,712
Likes
20
My Satellite Setup
TM Nano ~ sg2100
My Location
Midlands
#6
I copied the 2 files into var/tuxbox/config/newcamd

set to 755

set newcamd-betad 6.08 to be the default cam for CH4

Rebooted. I still get the "Cannot descramble" message :(

Any ideas what I've done wrong? Does it need to activate somehow?

Thanks for your help :)
 

mhku

Super Moderator
Staff member
Messages
4,712
Likes
20
My Satellite Setup
TM Nano ~ sg2100
My Location
Midlands
#7
All working now. I guess it was the missing cardserv file (the one called 0961 but with no reference to it in it's actual file name!).

Thanks :)
 
Messages
7
Likes
0
My Satellite Setup
Sky+
PVR-350
My Location
ATHENS GREECE
#8
I am using Newcamd 6.08 and i can view all the FTV channels but no sports or Movie channels. Can you also send me the two files to make it work? I've waisted 2 weeks of my life but no luck.

Thanks

I have:
Dreambox 500s
gemini 2.70
Newcand 6.08
Sky+ card
 

JTA

Regular Member
Messages
557
Likes
0
My Satellite Setup
DM8000HD+DM7000S with PLi image, CCcam, movable dish 0.85 m, very happy indeed
My Location
Belgium
#9
if you can view the FTV channels, then your files are OKAY.
if you have a subscription to these sports and movie channels, then you need to enter the correct BOXKEY number in the betad configuration file. This number can be found on the Sky digibox that's married to your card.
If you don't have the Sky digibox, then you're in trouble.
If you don't have a subscribtion, then you can forget about that, since NDS is currently not hacked.
 

mhku

Super Moderator
Staff member
Messages
4,712
Likes
20
My Satellite Setup
TM Nano ~ sg2100
My Location
Midlands
#10
Yes, only for FTV channels. It's not a hack!
 
Messages
7
Likes
0
My Satellite Setup
Sky+
PVR-350
My Location
ATHENS GREECE
#11
I have a subscription and a digibox and i know my BOXID, but i dont want to use betad.cfg i want to use cardserv.cfg, if i use betad it works with the BOXID but with cardserv it doesn't.

Is the BOXKEY different? do i have to put this in cardserv? and if yes were can i find it?

Thanks
 

mhku

Super Moderator
Staff member
Messages
4,712
Likes
20
My Satellite Setup
TM Nano ~ sg2100
My Location
Midlands
#12
The Boxid is your boxid and goes in both files. There are 2 cardserv files: cardserv.cfg that goes in /tuxbox/config/ and cardserv (the 0961 file) that goes in var/bin

The boxid is you $ky box ID. From setup > id?
 
Messages
7
Likes
0
My Satellite Setup
Sky+
PVR-350
My Location
ATHENS GREECE
#13
Sorry for bothering you again guys but i cant find the 0961 file anywere, will this work with newcamd 6.08? i've seen posts saying that you need newcamd 5.25 or something. can anyone send me that file? the only file in /var/bin is the cardserver_6.08.

thanks
 

JTA

Regular Member
Messages
557
Likes
0
My Satellite Setup
DM8000HD+DM7000S with PLi image, CCcam, movable dish 0.85 m, very happy indeed
My Location
Belgium
#14
if my memory serves me well, I believe that you need a patched version of cardserver, to be used with newcamd 5.28
but why do you want to use cardserver, betad works as well, and .... ah, of course, you can't use betad for card sharing :-doh!
 

john_graydon

Specialist Contributor
Messages
2,219
Likes
3
My Satellite Setup
Azbox premium HD+,Dusty Dreambox 7000s,& Sky HD.
My Location
Dublin....Ireland
#15
slekkas said:
Sorry for bothering you again guys but i cant find the 0961 file anywere, will this work with newcamd 6.08? i've seen posts saying that you need newcamd 5.25 or something. can anyone send me that file? the only file in /var/bin is the cardserver_6.08.

thanks
If you pm me with your mail add, I will send the files to you. And look in the idiots guide on how to do it. It all there.
 

mhku

Super Moderator
Staff member
Messages
4,712
Likes
20
My Satellite Setup
TM Nano ~ sg2100
My Location
Midlands
#16
OK, how's this then?

When I reboot I can watch ch4 and ch5 (with newcamd). Then I watch other channels (using camd3). If I go back to ch4 or 5 it won't decrypt it. I also lose the record facility on other channels if I've viewed ch4 or 5.

Typical Dreambox and more or less makes it a waste of time getting the bloody card working in the first place...
 
Top