Terrydlm
Learning Fast !
- Joined
- Mar 14, 2005
- Messages
- 43
- Reaction score
- 0
- Points
- 0
- Age
- 51
- Website
- www.delamare.gg
- My Satellite Setup
-
Technomate TM-1500CI+ and
Technisat SkyStar 2 USB HD and
Humax Foxsat-HD and
Humax Foxsat-HDR
TriAx 80cm Dish driven by a Darksat Motor.
Inverto 0.2db Silver Tech lnb.
- My Location
- Guernsey
I am able to receive most channels with my motorised 80cm dish on the satellites i would expect to be able to receive.
However there are some channels that i can see exist on Lyngsat but i can't receive them even though i can receive other channels on the same satellite.
For example on Telecom 2D 8 W i can receive 11483 H (Alegria) but i CAN'T receive 11486 H (TV Mont Blanc)!
11486 is programmed into my Technomate 1500CI and when scanning this transponder just gets skipped quickly.
If i adjust the skew i seem to be able to resolve this but then that knocks out other channels on other satellites. From what i have been able to find if you have a motorised system the skew should be set to 0. Is this correct ?
I can receive satellites from 53 East to 58 West.
I know TV Mont Blanc is also on other satellites. It's not a case of wanting to watch TV Mont Blanc on Telecom 2D it's a case of wanting my dish to be set up 100% properly.
However there are some channels that i can see exist on Lyngsat but i can't receive them even though i can receive other channels on the same satellite.
For example on Telecom 2D 8 W i can receive 11483 H (Alegria) but i CAN'T receive 11486 H (TV Mont Blanc)!
11486 is programmed into my Technomate 1500CI and when scanning this transponder just gets skipped quickly.
If i adjust the skew i seem to be able to resolve this but then that knocks out other channels on other satellites. From what i have been able to find if you have a motorised system the skew should be set to 0. Is this correct ?
I can receive satellites from 53 East to 58 West.
I know TV Mont Blanc is also on other satellites. It's not a case of wanting to watch TV Mont Blanc on Telecom 2D it's a case of wanting my dish to be set up 100% properly.