Lnb ??

M

magyar

Member
Messages
3
Likes
0
My Satellite Setup
Manhattan 500
1,8m channel master motorised dish.
My Location
U.K
#1
Can you please recommend a suitable LBN for my system.

Manhattan Plaza 500.

Channell Master Offset. 1.8m dish. motorised.

Cable run of 45 meters.



Thanks.
 
CROSSBONES

CROSSBONES

Specialist Contributor
Messages
2,003
Likes
190
My Satellite Setup
1.2m channel master on a jeager 1224 motor. 55cm fibo Gregorian. VU solo2.
My Location
S.Wales
#2
Nice dish! Have you got the feed horn? or is it the 40mm lnb holder?

If you have the feed then you will need a C120 lnb, Inverto, Invacom are great.

If you have the 40mm lnb clamp then any Universal lnb will do. (Sharp titanium)

But I recommend you get a feed horn as it illuminates all your dish. They work very well together. It will perform much better;)
 
M

magyar

Member
Messages
3
Likes
0
My Satellite Setup
Manhattan 500
1,8m channel master motorised dish.
My Location
U.K
#3
When I unplugged my Drake 800 I still have the Channel master feed horn polariser and an Echostar Digital/Analog Quatro LNB noise figure 0.8 dB. I also got hold of a Invacom SNF-0.31 LNB which I could fit the CM feed horn to.

Which would you recommend?

Thanks.
 
CROSSBONES

CROSSBONES

Specialist Contributor
Messages
2,003
Likes
190
My Satellite Setup
1.2m channel master on a jeager 1224 motor. 55cm fibo Gregorian. VU solo2.
My Location
S.Wales
#4
Get rid of the polariser, and just use the Invacom LNB with the feed.
 
M

magyar

Member
Messages
3
Likes
0
My Satellite Setup
Manhattan 500
1,8m channel master motorised dish.
My Location
U.K
#5
Thanks, I've fitted the Invacom LNB with the feed. and now turning it a little bit one way then the other to get rid of the picture breaking up. Any useful tips welcome.

Thanks.
 
Top