Matrix Reload version 1081

trig

Member
Joined
Nov 28, 2004
Messages
8
Reaction score
0
Points
0
Age
68
Hi, need some help.

can I update my M.R 1081 with version 1.161 ?

I am new to all this cam stuff and a bit confused.


cheers and merry christmas to you all---------------trig
 

neilli.p

Regular Member
Joined
Dec 9, 2003
Messages
29
Reaction score
0
Points
0
You can indeed. You'll need a Cas 2 interface programmer or
a laptop with a pcimca slot and programming software.
You'll find info on all this in the excellent tutorial/how to sections here.

Neill


trig said:
Hi, need some help.

can I update my M.R 1081 with version 1.161 ?

I am new to all this cam stuff and a bit confused.


cheers and merry christmas to you all---------------trig
 

trig

Member
Joined
Nov 28, 2004
Messages
8
Reaction score
0
Points
0
Age
68
Thanks mate, can I also use my Clanzers Mutznut to do this?

trig.
 

wolfav

Regular Member
Joined
Dec 18, 2004
Messages
470
Reaction score
0
Points
0
Age
53
My Satellite Setup
two sky+amstrad boxes
technomate5500ci+ with 80cm motarised dish irderto cam mr mrev +dragoncam blue tit numerous fun cards infinity pheonix compaq and dell on wirelessrouter
My Location
no mans land
fun cards will also do the trick
icon10.gif
icon10.gif
icon10.gif
 

H.GEE

Regular Member
Joined
Dec 27, 2002
Messages
26
Reaction score
0
Points
0
Website
Visit site
I have upgraded my MR form 1080 to 113 then to 114 then to 1161 which is fine for tps and mltvsn [no card required]..then went back to 1070/1071 for wltdo file on tit card for cabo which worked but tended to cut off half way through a film...now back on 1161 for tps......each MR upgrade was with 2 fun6 cards using hexfiles and loader with no problems
 

lolo69

Member
Joined
Jun 13, 2004
Messages
8
Reaction score
0
Points
0
Age
63
H.GEE said:
I have upgraded my MR form 1080 to 113 then to 114 then to 1161 which is fine for tps and mltvsn [no card required]..then went back to 1070/1071 for wltdo file on tit card for cabo which worked but tended to cut off half way through a film...now back on 1161 for tps......each MR upgrade was with 2 fun6 cards using hexfiles and loader with no problems
High, I tried it with funcard 6 , an funcard 4 but no succes, where did you find the good soft. with the funcards 4, i found a upd.file that i split up into 8 files
I lodaded the flash file and 1 file on 1 card. when i arrived at card 6 i received the message image corrupt. do you have any advice

thanks

laurent
 
Top