al067
Member
- Joined
- Oct 25, 2007
- Messages
- 6
- Reaction score
- 0
- Points
- 0
- Age
- 54
- My Satellite Setup
-
Starsat SR-X4200D receiver, a 180cm dish with two LNBs' (13° and 19.2°).
PC: Pentium 4 2.4Ghz, 160GB HDD, 1GB Ram and a 512MB DDR2 graphic card.
- My Location
- Laghouat, Algeria
Good morning,
I have a starsat 6300CU Super receiver. The adult packages MCT and Sexview + INXTC were beautifully working with March 18th update but after introducing the latest update (March 26) only INXTC is working. One more thing, in the past times and after updating and switching on my receiver was showing a screen bearing the following : upgrading front panel please wait do not power off then it works but after introducing alidvbs29c032608, that screen appears no more and the receiver boots and goes back to standby then you have to switch on again. Is that normal.
Regards,
Ahmed
I have a starsat 6300CU Super receiver. The adult packages MCT and Sexview + INXTC were beautifully working with March 18th update but after introducing the latest update (March 26) only INXTC is working. One more thing, in the past times and after updating and switching on my receiver was showing a screen bearing the following : upgrading front panel please wait do not power off then it works but after introducing alidvbs29c032608, that screen appears no more and the receiver boots and goes back to standby then you have to switch on again. Is that normal.
Regards,
Ahmed