MM >>>>>

Status
Not open for further replies.

T24

Info Exec
Joined
Oct 9, 2002
Messages
566
Reaction score
5
Points
18
Driver for PCMCIA
 

T24

Info Exec
Joined
Oct 9, 2002
Messages
566
Reaction score
5
Points
18
MM to MR "Duolabs"
 

T24

Info Exec
Joined
Oct 9, 2002
Messages
566
Reaction score
5
Points
18
Programming MM

How to do:

1. put the module in SetTopBox (ST:cool:


STB-CI-Menue: DreamLoad (ready for upload) or:


select "Prepare for loading" and press OK


"YES - Activate loader" and press OK


(now: the old file in the module is deleted)


remove and re-insert the module


Now the module is in upload-mode


2. insert programmer into the module


(green LED = power), connect RS232-cable to PC

comport 1 or 2


3. start loader-programm


select comport in menu "Settings"


press connect


4. load file *.mbf by clicking "Program module ..."


select file>upload begin



5. remove and re-insert the module
 

T24

Info Exec
Joined
Oct 9, 2002
Messages
566
Reaction score
5
Points
18
Convert MM > Matrix reloaded

1.Connect Cas 2 inteface to Magic Cam
2.Connect Cas 2 to PC
3. Use Cas studio software
4.click on Magic Cam picture
4. Click on connect
5.Click "Erase all"
5. Load Xilinix file Matrix Cas
5-Click open file and load the latest MR software
6. Click on write
 
Status
Not open for further replies.
Top