motor stopped working

[dr nail]

hi all my motor has stopped working when operated from my dreambox any ideas folks,

this is a list of thing i have tried

changed wires from dish to reciver
changed wires from lnb to motor
reset motor back to 0 degrees (motor moves of buttons on side of it)
have also reset dreambox to factory settings and motor still wont move any ideas would be welcome thanks in advance nath

 

[RedDevil_UK]

when you say stopped i presume all was well, then nothing!!

and not a new installation?

well either its software... although thats sounds doubtful going off the reset.
so try a new firmware install

or its hardware

sometimes replacing the PSU can help

PS
when you go into motor setup... can you move it manually east and west?

 

[dr nail]

yo , yeah it was all working fine till i got a new tele and unplugged everything ,u cant manually move east or west from dreambox but u can from motor itself

 

[mhku]

Can you move the dish when you use the < > keys (east west) in Motor Setup?

 

[dr nail]

hi no you cant move the dish of east west arrows.