sajbyjaan
Member
- Joined
- Aug 30, 2007
- Messages
- 9
- Reaction score
- 0
- Points
- 0
- Age
- 64
- My Satellite Setup
- 90cm dish, STAB90HH motor, Echolink Receiver, Motorised system
- My Location
- Scotland
Hi,
I have a STAB HH90 motor, a 90x80cm off set dish which I am trying to set up for motorised system. I am located in Glasgow, with the following coordiates obtained from the STAB website
Latitude=55.9N
Longitude=4.3W
Dish Elevation for HH90=37.2
I have installed the mounting pole adjusted it to make sure it is vertical. set up the motor to the specified latitude of 55.9 deg, but I am completely lost with this Dish Elevation 37.2.
The scale at the back of my dish is graded from -5 to +25 degrees, so I am unable to set the 37.5 degree elevation. Am I reading this wrong and should it be a diffent value and if so how do I calculate the dish elevation for my location to have the system up and working.
Thanks in advance.
I have a STAB HH90 motor, a 90x80cm off set dish which I am trying to set up for motorised system. I am located in Glasgow, with the following coordiates obtained from the STAB website
Latitude=55.9N
Longitude=4.3W
Dish Elevation for HH90=37.2
I have installed the mounting pole adjusted it to make sure it is vertical. set up the motor to the specified latitude of 55.9 deg, but I am completely lost with this Dish Elevation 37.2.
The scale at the back of my dish is graded from -5 to +25 degrees, so I am unable to set the 37.5 degree elevation. Am I reading this wrong and should it be a diffent value and if so how do I calculate the dish elevation for my location to have the system up and working.
Thanks in advance.