MultiV*****?

haggard

Regular Member
Messages
467
Likes
0
My Satellite Setup
7000S - 300GB Maxtor
1GB USB -
Syslink wifi bridge from DB to Syslink wifi router to Apple Extreme streaming relay to Apple G5, 2 xG4.
Elgato into G4 17 in for Apple DVB-T captures.
Panasonic 42 HD ready
My Location
NW England
#1
Got problems with MV1-8 but not seeing symptoms with any other channels or any other sat.

Picture is flashing and blocking.
It comes up with a decent signal 80%
Ive peaked the dish.
Swapped lnb
Checked and swapped cables.
switched between predator and newcamd.
Anyone getting a clear pic with similar system, please OK in.
 

haggard

Regular Member
Messages
467
Likes
0
My Satellite Setup
7000S - 300GB Maxtor
1GB USB -
Syslink wifi bridge from DB to Syslink wifi router to Apple Extreme streaming relay to Apple G5, 2 xG4.
Elgato into G4 17 in for Apple DVB-T captures.
Panasonic 42 HD ready
My Location
NW England
#3
Fransuoa said:
have same problem
need very good cable
Thnx F
I have a very good cable.
I tried a temp very HQ double screened cable (twice price of CT100) and problem persists.
What's special abt MV1-8 and no other channels, I wonder?
 

Fransuoa

Regular Member
Messages
166
Likes
0
My Satellite Setup
hotbird 13
My Location
uk
#4
have them very clear on a cheap receiver (tech****) for some reason !!!!
 

Lancelot

Specialist Contributor
Messages
3,638
Likes
8
My Satellite Setup
SS1.
125cm Gibbi with Channelmaster feedhorn and Inverto C120 twin.
36v H to H 62E - 61.5W
My Location
South central
#5
Though never experencing this myself - there are many threads on other forums on this subject.

Most of which are without a satisfactory conclusion :(


L.
 

john_graydon

Specialist Contributor
Messages
2,219
Likes
3
My Satellite Setup
Azbox premium HD+,Dusty Dreambox 7000s,& Sky HD.
My Location
Dublin....Ireland
#6
haggard said:
Got problems with MV1-8 but not seeing symptoms with any other channels or any other sat.

Picture is flashing and blocking.
It comes up with a decent signal 80%
Ive peaked the dish.
Swapped lnb
Checked and swapped cables.
switched between predator and newcamd.
Anyone getting a clear pic with similar system, please OK in.
Hi Haggard
I believe there was a new Tpscrypt file out to cure this 21/9/05. I changed images so didnt need to change anything using newcamd 6.2 patched everything fine on Gemeni 2.20
PM me if you cant get it.
 

haggard

Regular Member
Messages
467
Likes
0
My Satellite Setup
7000S - 300GB Maxtor
1GB USB -
Syslink wifi bridge from DB to Syslink wifi router to Apple Extreme streaming relay to Apple G5, 2 xG4.
Elgato into G4 17 in for Apple DVB-T captures.
Panasonic 42 HD ready
My Location
NW England
#7
Lancelot said:
Though never experencing this myself - there are many threads on other forums on this subject.

Most of which are without a satisfactory cocnclusion :(


L.
Dear Sir L
Interersting. I would say :/ rather than :( because out of adversity usually comes enlighgenment.
I have been asking myself what has changed,
because I had all channels rock solid so why should MV do this with no change.
I have been using a new image and rescanning several times.
There are some funnies My channel list now says that the Freesat package on 28.2E is also on 19.2. This latest Hydra image, Phoenix 1.09 has some curious unexpected effects. I think I will do a total re-flash.
 

costasd3

Dreambox Emu Tamer
Messages
52
Likes
0
#8
haggard said:
Dear Sir L
Interersting. I would say :/ rather than :( because out of adversity usually comes enlighgenment.
I have been asking myself what has changed,
because I had all channels rock solid so why should MV do this with no change.
I have been using a new image and rescanning several times.
There are some funnies My channel list now says that the Freesat package on 28.2E is also on 19.2. This latest Hydra image, Phoenix 1.09 has some curious unexpected effects. I think I will do a total re-flash.
Had the same problem some time ago when i flashed a new image. I re-flashed it and the problem was gone.
 

Artist 2004

Anatolia correspondent
Messages
252
Likes
0
My Satellite Setup
GoldMaster 7400 CIM 2MB with Kaon board 12.03.a5. Technomate 1000, Technomate 5200 USB.
Two 80cm offset dishes.
My Location
West coast, Turkey
#9
Did you buy a new cordless phone recently or move the base station? Or buy any other electronic gizmos?

I often have this problem, with mainly just these channels, but when I unplug the mains from the base station of my phone the problems go away. Presumably the interference affects only the mvision frequencies.
 

whatsthis

Regular Member
Messages
290
Likes
0
My Satellite Setup
DM7020 Screambox
MAC OSX & windowzz 98SE
Gemini
1664 on tap
My Location
13°E
#10
Hi
I also had problems with picture quality and reflashing with difficulty the Hydra image, Phoenix 1.09. I now have Gemini 2.2 and all stations are stable.
rgds
 

BGonaSTICK

Retired Moderator
Messages
5,145
Likes
0
My Satellite Setup
Dreambox 7000, Skystar2
My Location
Brighton
#11
Yeah, same experiences as others... latest DMM official 1.0.9.1d beta in flash and either Gemini 2.1 or 2.2 and SDT5 on usb with camd3 - all combinations OK now, even recording.

I feel that the processing required for some combinations of software is reaching the capability of the box itself, which is why later images and emus are rumoured to be paying more attention to effecient coding and execution.
 

Fransuoa

Regular Member
Messages
166
Likes
0
My Satellite Setup
hotbird 13
My Location
uk
#12
would any of the experts sort out this problem of multivision channels
they come clear for few hours then gone.
why.......? couldnot understand
cheers

 

john_graydon

Specialist Contributor
Messages
2,219
Likes
3
My Satellite Setup
Azbox premium HD+,Dusty Dreambox 7000s,& Sky HD.
My Location
Dublin....Ireland
#13
Fransuoa said:
would any of the experts sort out this problem of multivision channels
they come clear for few hours then gone.
why.......? couldnot understand
cheers


seems ok here.
 

haggard

Regular Member
Messages
467
Likes
0
My Satellite Setup
7000S - 300GB Maxtor
1GB USB -
Syslink wifi bridge from DB to Syslink wifi router to Apple Extreme streaming relay to Apple G5, 2 xG4.
Elgato into G4 17 in for Apple DVB-T captures.
Panasonic 42 HD ready
My Location
NW England
#15
john_graydon said:
seems ok here.
and
all of you said:
various helpful comments
Yes, I have recently replaced analogue wireless phone with two digital ones. They have a range of 300m.
But this trouble just started on Friday for no reason, whereas the phones have been in 3 weeks. Maybe a neighbour has a clashing frequency.
I think I shall do a complete rod out and re-flash.
I have been using Hydra Phoenix for about 2 weeks but have been editing and reloading the channels because this image (is it the image?) finds and stores e.g. all the TAQs as separate providers. So there's taq1 in a folder TQ1 etc.
I then put them on usb, that made things worse. Pulled the usb and put them on hdd and now they are virtually shot. I dont like this image.

Oh and my whole bloody house is running on wireless:
CH thermostats, doorbell, inside and outside thermometers to tell the cat if its warm enough to go out. Wireless LAN. Landline telephone.
 

john_graydon

Specialist Contributor
Messages
2,219
Likes
3
My Satellite Setup
Azbox premium HD+,Dusty Dreambox 7000s,& Sky HD.
My Location
Dublin....Ireland
#16
Fransuoa said:
hi john
is fwp 6 out or still under trial
I Pm you with the site that has it.let know if you can work it out.
 

john_graydon

Specialist Contributor
Messages
2,219
Likes
3
My Satellite Setup
Azbox premium HD+,Dusty Dreambox 7000s,& Sky HD.
My Location
Dublin....Ireland
#17
haggard said:
and


Yes, I have recently replaced analogue wireless phone with two digital ones. They have a range of 300m.
But this trouble just started on Friday for no reason, whereas the phones have been in 3 weeks. Maybe a neighbour has a clashing frequency.
I think I shall do a complete rod out and re-flash.
I have been using Hydra Phoenix for about 2 weeks but have been editing and reloading the channels because this image (is it the image?) finds and stores e.g. all the TAQs as separate providers. So there's taq1 in a folder TQ1 etc.
I then put them on usb, that made things worse. Pulled the usb and put them on hdd and now they are virtually shot. I dont like this image.

Oh and my whole bloody house is running on wireless:
CH thermostats, doorbell, inside and outside thermometers to tell the cat if its warm enough to go out. Wireless LAN. Landline telephone.
Have a look at that site i pm you with. Use the image at the top in image section. Everything in it you need.
 

haggard

Regular Member
Messages
467
Likes
0
My Satellite Setup
7000S - 300GB Maxtor
1GB USB -
Syslink wifi bridge from DB to Syslink wifi router to Apple Extreme streaming relay to Apple G5, 2 xG4.
Elgato into G4 17 in for Apple DVB-T captures.
Panasonic 42 HD ready
My Location
NW England
#18
john_graydon said:
Hi Haggard
I believe there was a new Tpscrypt file out to cure this 21/9/05. I changed images so didnt need to change anything using newcamd 6.2 patched everything fine on Gemeni 2.20
PM me if you cant get it.
John
Thnx for that. 21st is about the date it struck me.
Please pm with file location to save me hunting.
much appreciated.
Would you recommend Gemini . . . . .
as opposed to latest hydra phoenix?
 

haggard

Regular Member
Messages
467
Likes
0
My Satellite Setup
7000S - 300GB Maxtor
1GB USB -
Syslink wifi bridge from DB to Syslink wifi router to Apple Extreme streaming relay to Apple G5, 2 xG4.
Elgato into G4 17 in for Apple DVB-T captures.
Panasonic 42 HD ready
My Location
NW England
#19
haggard said:
John
Thnx for that. 21st is about the date it struck me.
Please pm with file location to save me hunting.
much appreciated.
Would you recommend Gemini . . . . .
as opposed to latest hydra phoenix?
Looks likes it's fixed now.
Hydra phoenix CP is sorted, with mary's back on line.
Swap from Newcamd 6.01 to 6.02, new keys, and the flashing and blocking has stopped.
Thnx for all help.
 

gameboy

Ding Dang Doo
Messages
4,305
Likes
5
My Satellite Setup
DreamBox 7000s - Nokia Freeview - Several GameBoys - DS Lite - ZX81 - SNES - N64 - Saturn - Dreamcast - PlayStation - PS2 - Gamecube - PSP - iPod - iPhone - XBox - PS3 - Wii - iPad - No Life!
My Location
Scotland
#20
haggard said:
Hydra phoenix CP is sorted, with mary's back on line.
Difficult to tell when it's down.

Only came back on Sunday - is it still working during these troubled times?
 
Top