jonnybobs
Member
- Joined
- Sep 10, 2009
- Messages
- 10
- Reaction score
- 0
- Points
- 0
- Age
- 41
- My Satellite Setup
- DISH ONE:-Sky HD on a Zone 1 dish with Quad LNB using x2 Connections @ 28.2 Deg. DISH TWO:- is single Zone one with a single LNB @ 19.2 Deg coupled to a Comag Porty II reciever for FTA german TV.
- My Location
- Houghton Regis, Dunstable
This is my flat. It's a block of 4. I live on the top floor on the right hand flat.
The pictures:- Let me explain....
Sat5.jpg :- Well, the right hand dish used to have the quad LNB on it and the dish was poined to 28.2 Degrees. When I installed the 2nd dish which on the pic is the left hand one, I was unable to get the angle needed for 19.2 Degrees. So, I swapped cables and LNB over and re aligned the dishes.
Sat2.jpg:- I live in a rented flat. The right hand dish was already there. I am not allowd to make ANY external mods that might damage the property. This does include putting holes in the walls and bricks. So, I undid the two left hand bolts on the right hand dish bracket and slid the left hand bracket under it and put the two bolts back in..
Sat1.jpg:- Shows the end result of my work....!
My advice here,
I had to remove the old two coax cables which were thick and nasty. now, you will want to put your new ones in. If you can eget hold of the sky man ask for some twin coax, This stuff is great, its very much thinner then the coax and all I did was taped the twin stuff to the old thick stuff and pulled it through.
The pictures:- Let me explain....
Sat5.jpg :- Well, the right hand dish used to have the quad LNB on it and the dish was poined to 28.2 Degrees. When I installed the 2nd dish which on the pic is the left hand one, I was unable to get the angle needed for 19.2 Degrees. So, I swapped cables and LNB over and re aligned the dishes.
Sat2.jpg:- I live in a rented flat. The right hand dish was already there. I am not allowd to make ANY external mods that might damage the property. This does include putting holes in the walls and bricks. So, I undid the two left hand bolts on the right hand dish bracket and slid the left hand bracket under it and put the two bolts back in..
Sat1.jpg:- Shows the end result of my work....!
My advice here,
I had to remove the old two coax cables which were thick and nasty. now, you will want to put your new ones in. If you can eget hold of the sky man ask for some twin coax, This stuff is great, its very much thinner then the coax and all I did was taped the twin stuff to the old thick stuff and pulled it through.