cenizas
Member
- Joined
- Jul 12, 2005
- Messages
- 19
- Reaction score
- 0
- Points
- 0
- My Satellite Setup
-
kaonKSC-570 2CI
Pana TU-DSB30
1.9m+1.2m motor
- My Location
- Valencia, Spain
Saludos,
I suppose first posts commonly ask for help. Mine is no different.
Firstly, thanks to all members; reading all your discussions has got me this far but now my nose is being firmly ground into the inevitable brick wall.
I´m attempting to use my freesat from s** card with the dragon, programmed by the Dynamite running pred3.11. All seems well.
Into my Kaon KSC-570 2CI receiver, the dragon loads predator, my old box number is inputed, NDS freesat card goes into the cam, I turn on the receiver again and it has no affect on the type or number of channels that are opened. Even the FTV channels (ITV etc) don´t open.
Could this problem be based in the Kaon hardware? It currently runs it´s original settings as I´ve been extremely reluctant to alter them and perhaps wreck it.
They are as follows...
KSC-570 2CI (not "H"or"Z")
Info. OE.05.07-CFF2
S/W: V13.05.03
H/W: V12.01.A5
Loader: V6.1.9
C.A:2.2.3
When first checking this newly bought receiver´s compatability with the dragon I noted someone identifying the hardware as problematic. They mentioned V.13.41.65, which I´ve searched for at the sites posted in other threads and couldn´t find.
Could this hardware be my problem or am I tripping on the marbles I´ve lost to this brick wall? I´m enjoying the challenge of this newfound pastime but imagine a result; that would really ice the cake.
Any help offered would be very gratefully received. Thanks.
I suppose first posts commonly ask for help. Mine is no different.
Firstly, thanks to all members; reading all your discussions has got me this far but now my nose is being firmly ground into the inevitable brick wall.
I´m attempting to use my freesat from s** card with the dragon, programmed by the Dynamite running pred3.11. All seems well.
Into my Kaon KSC-570 2CI receiver, the dragon loads predator, my old box number is inputed, NDS freesat card goes into the cam, I turn on the receiver again and it has no affect on the type or number of channels that are opened. Even the FTV channels (ITV etc) don´t open.
Could this problem be based in the Kaon hardware? It currently runs it´s original settings as I´ve been extremely reluctant to alter them and perhaps wreck it.
They are as follows...
KSC-570 2CI (not "H"or"Z")
Info. OE.05.07-CFF2
S/W: V13.05.03
H/W: V12.01.A5
Loader: V6.1.9
C.A:2.2.3
When first checking this newly bought receiver´s compatability with the dragon I noted someone identifying the hardware as problematic. They mentioned V.13.41.65, which I´ve searched for at the sites posted in other threads and couldn´t find.
Could this hardware be my problem or am I tripping on the marbles I´ve lost to this brick wall? I´m enjoying the challenge of this newfound pastime but imagine a result; that would really ice the cake.
Any help offered would be very gratefully received. Thanks.