new install New reciever?

[bigron]

Hi Guys,
sorry to bother you with another noob question but just need a pointer before starting my install.

I have been given
criptyc h-h100 motorised mount,
cal amp single 5db lnb
Technomate tm1500 C1+ reciever. (no instructions)

I am about to buy
85cm dish
wall bracket
cable and connecters.

What I would like to know is should i upgrade my reciever and LNB before i start my install.

The equipment came out of a pub and was working fine before removal. I am told the reciever is a decent model but am worried about set up with no instructions and if the LNB needs updating to a lower noise model.

Thanks in advance

Ron2

 

[rolfw]

The receiver will be fine and software patches are readily available for that model, a new LNB will only set you back a few pounds, but that one isn't bad.

For brackets, get yourself a set of T&K brackets and a length of scaffold pole, they are easier to get perfectly plumb than other brackets.

 

[satelliteman]

If your going for a new dish, there seems to be a lot of talk in the trade regarding the DIGIT-GA Penta style Dish. I have been told they perform very well including IRS communal systems

 

[bigron]

Thanks Rolfw,

Just been lookin now and have found some further info about the tm1500 and think i can handle its setup. As for the LNB Im thinking of going for a decent quad as at some point in the not to distant future (when i can convince her indoors) of upgrading to a reciver with PVR facility. Plus will there be noticeable difference between 3db and 2db?

Regards

 

[bigron]

Satelliteman i read they have increased gain on standard dishes and as long as there are no motor mounting issues I would be interested to try one. would like to hear if anyone has used one.

regards

 

[bigron]

Hi guys thanks for the previous help.

I've done a bit of research and have decided on the following components:

INVERTO SILVER TECH 0.2dB TWIN

http://www.pulsat.com/satellite/site/details.php?product_id=260&catID=9

Fracarro Penta 85 ALLUMINIUM


http://www.highdefinitionuk.com/dishes/fracarro-penta-85-alluminium-p-511.html

The lnb is mentioned often online and seems to be a fav among contributers here, The dish also seems to be quite popular and i like the look.
Installation will be taking place over the coming weeks and i will be using the guides found on this forum to do so.

If ok I will give a running commentary as i go to help myself and other noobs learn more.

Thanks again

Ron

 

[rolfw]

Look forward to seeing your progress Ron, some photos will be nice.

You've certainly made a couple of good choices of equipment.

 

[bigron]

Thanks rolfw,

A little research and a helpful forum go a long way.
pictures will be included in further posts.

One quick question is which cable would you recomend? one of the electrical wholesalers i use has standard sat coax but can get anything i require to order.

Thanks again

 

[rolfw]

How long will the cable run be? I use WF100 for my normal runs, but at the end of the day, most quality all copper cables perform similarly.

 

[bigron]

hi Rolfw,

cable run will be no more than 20 mts. I've acquired some wf100. Install begins next weekend weather permitting.

Thanks again

 

[rolfw]

Good luck, hope the weather is better than promised.

 

[bigron]

there i was all set and ready to install, all equipment bought, tools and drill at the ready brought a ladder home from work and everything.
Then it goes and snows! A bit of rain i can deal with but we got a full on snow storm.

To make matters worse I have to work next weekend so no install for 2 weeks:-Nooo.

Looking at my new dish on the living room floor is getting me down!:mad:

 

[satelliteman]

Wise not to attempt to install an 85cm dish & motor in the snow Bigron. You need to pick a nice clear day with no wind and crack on. Good luck

 

[bigron]

thanks Satelliteman im keeping my eye on the forecasts!