Newbie satellite dish help (motorised)

[JohnyBoy2oo6]

Hi people

I could really do with some help setting up my dish and these forums are gr8

I have a 90cm dish

a JaeGer 99 motor

a technomate 5000dapci upgrading to 1500ci super shortly

and live in the north east of england in a town called amble

55.3326°N, 1.5760°W this is where the dish is

any help or guides to my motor would be nice thanks

will take some pick's the morn for you guys if thats any good

 

[betas]

firstly you say you are going update shortly to a 1500 so i would advise you install a disq moter because its easy. Any way pole should be plum set angle on mount to53 digrees dish depending dish eg 22digrees move mount to 0 (middle central postion) fix dish on in middle of mount arm look south tune 1w eg bbc world in little bit tight move east and west when found connect receiver MOTER wires move east to 28e push dish slightly up and down check signal move to 30w check signal if push up more signal move whole mount slightly eastdo oposate if up

 

[Robbo]

Read Rolf's guide mate.

http://www.satellites.co.uk/satelli...6-setup-guide-moteck-diseqc-motor-others.html


and if you get problems post back.


Since you are so close to 1 west, the motor will only needed to be turn about half a degree intitially, towards the east.

And since the motor is 36V, you'll also need a V-box for use with the TM1500.

Robbo