Newcamd upgrade

zanders

Regular Member
Messages
150
Likes
0
My Location
Hampshire, UK
#1
Hi All,

I tried to use the idiots guide on newcamd but the zip download is an empty file.

I downloaded newcamd 5.28 from a site which essentially has two important files
newcamd.i386, newcamd.ppc.

I have replaced the newcamd.ppc on my dreambox but cannot find an equivalent.i386 file.

Is there anything else that I should do as this does not work - I still have newcamd 5.25 displayed and the channles will not decode???

I also downloaded the lastest rsa keylist and applied - no difference...
 

pant

Regular Member
Messages
174
Likes
0
#2
zanders said:
Hi All,

I tried to use the idiots guide on newcamd but the zip download is an empty file.

I downloaded newcamd 5.28 from a site which essentially has two important files
newcamd.i386, newcamd.ppc.

I have replaced the newcamd.ppc on my dreambox but cannot find an equivalent.i386 file.

Is there anything else that I should do as this does not work - I still have newcamd 5.25 displayed and the channles will not decode???

I also downloaded the lastest rsa keylist and applied - no difference...
You have to change only the .ppc file and cmod to 755.In some images u need to rename the file also and in some not.It ll be better if you post which image you using
 

zanders

Regular Member
Messages
150
Likes
0
My Location
Hampshire, UK
#3
pant said:
You have to change only the .ppc file and cmod to 755.In some images u need to rename the file also and in some not.It ll be better if you post which image you using

Yep - I did all that. still newcamd 5.25 being displayed and taquilla is not decoding.

I am using Hydra angharad.
 

pant

Regular Member
Messages
174
Likes
0
#4
zanders said:
Yep - I did all that. still newcamd 5.25 being displayed and taquilla is not decoding.

I am using Hydra angharad.
At angharad you dont need to rename the file but you leave it newcamd.ppc and change the cmod.
Not always the version number changes (5.25 to 5.28) but the only way to know if the upgrade was ok is if the channels are opening.
You have to have the latest keys and you have to cmod rsakeylist and keylist to 755.
About taquilla I dont know if they are available with 5.28.
 

gameboy

Ding Dang Doo
Messages
4,305
Likes
5
My Satellite Setup
DreamBox 7000s - Nokia Freeview - Several GameBoys - DS Lite - ZX81 - SNES - N64 - Saturn - Dreamcast - PlayStation - PS2 - Gamecube - PSP - iPod - iPhone - XBox - PS3 - Wii - iPad - No Life!
My Location
Scotland
#5
Hydra Angharad has a new working control panel - try that and you can upgrade over the Internet.

Or you could try Zeus - new image out soon they are testing now.

T working with Newcamd 5.28
 

zanders

Regular Member
Messages
150
Likes
0
My Location
Hampshire, UK
#6
gameboy said:
Hydra Angharad has a new working control panel - try that and you can upgrade over the Internet.

Or you could try Zeus - new image out soon they are testing now.

T working with Newcamd 5.28
When I try to upgrade the control panel it just sits on downloading and goes no further.

Internet access to the DB is fine so I think there is a problem.
 

zanders

Regular Member
Messages
150
Likes
0
My Location
Hampshire, UK
#7
zanders said:
When I try to upgrade the control panel it just sits on downloading and goes no further.

Internet access to the DB is fine so I think there is a problem.

I am there - lots of messing around - newcamd 5.28 + new keys.
 

rolfw

Believe it when I see it Admin.
Staff member
Messages
37,671
Likes
1,279
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
#8
How did you sort it zanders?
 

zanders

Regular Member
Messages
150
Likes
0
My Location
Hampshire, UK
#9
rolfw said:
How did you sort it zanders?
I found a post on toe's about Hydra Server back online.

Downloaded the full install of newcamd and run the manual install followed
by a keys update.

Its all working okay now.
 
Top