Pace DS810XE

jasonx2007

Member
Joined
Apr 10, 2007
Messages
19
Reaction score
0
Points
0
Age
46
My Satellite Setup
pace ds810xe /manhatten st-200 /tecnomate 1500+ super /65cm traix dish on a satcatcher motor /1 x trex twin cam 1x dragon twin cam duolabs cas3 programmer and diablo cam light
My Location
hull city/uk
god i paid £107 from pace for mine 2 months ago

be better if there fix the crashing on the box

come on pace you got a winner get your firmware fixed

life with my diablo cam make this box the best in the world
 

rato

International Administrator
Joined
Jul 11, 2005
Messages
1,429
Reaction score
0
Points
38
Age
54
My Satellite Setup
DM800; Nokia 9800s; Nokia 9902S w/T-Rex 3.66
w/ Inverto IDLP-40TL +
Technisat 33 dish; Pace DS430N + Humax HDCI-2000 w/
Gibertini OP 1.25m dish w/Inverto 0.3dB. & Invacom 0.2dB. w/ Spaun SAR 411;
CAS 3;FUN7; SkyStar2; AltDVB;
My Location
Setubal, Portugal
Hi guys,

Once again, great update info on the Pace.:)

So, can we get a confirmation that the T-Rex with Predator firmware is working with the new firmware on pace 1.0.35(pics of the Pred. menu working on the Pace)?

jasonx2007: is it confirmed as you posted; "..using trex cam on new firmware on pace 1.0.35
firmware on trex cam is predverde working ok and drogon cam firmware 3.62..."
? Can we get a confirmation the you can access the Pred. menu, insert new k*ys, and do new update to the Pred firmware with a Dragon card(ex. 3.62 to 3.63), without crashing, freezes, pausing, etc.? Does it work with a Sly card?

Thanks:)
 

jasonx2007

Member
Joined
Apr 10, 2007
Messages
19
Reaction score
0
Points
0
Age
46
My Satellite Setup
pace ds810xe /manhatten st-200 /tecnomate 1500+ super /65cm traix dish on a satcatcher motor /1 x trex twin cam 1x dragon twin cam duolabs cas3 programmer and diablo cam light
My Location
hull city/uk
firmware 364 lets u in the cam for 3 secs then crashes making you unplug the main power .. no firmware at present lets you in the trex and dragon cam on a pace ds810xe as for my sky card thats a no no on both my cams crashes or its just my free to view card so no ch4 hd 4 me

emailed pace support to start a new firmware as when i scan for channels on other sats i nw have to unplug the mains or reset the box to get it back on

so the more people that complain about the firmware the faster pace fix this lovely box

email here with ur problems: ukcustomcare*pacemicro.com

and thank you all
 

jasonx2007

Member
Joined
Apr 10, 2007
Messages
19
Reaction score
0
Points
0
Age
46
My Satellite Setup
pace ds810xe /manhatten st-200 /tecnomate 1500+ super /65cm traix dish on a satcatcher motor /1 x trex twin cam 1x dragon twin cam duolabs cas3 programmer and diablo cam light
My Location
hull city/uk
just got hold off the new 364 pred from dream pirates

played around with the keys and it worked on one line turn off box and got in 2nd line then reboot box . works . took a few trys mind u .

as for sky box serial worked first time but tex cam dont like my card

(so we getting there .. i let you know when i test the atlantis software
if this works )

photos are from pace ds810xe on pred 364 km version . on a sonyericsson w810i
 

Attachments

  • update keys 1.JPG
    update keys 1.JPG
    299.6 KB · Views: 109
  • test sky card.JPG
    test sky card.JPG
    310.3 KB · Views: 102

a_q

Member
Joined
Jan 14, 2008
Messages
4
Reaction score
0
Points
0
Age
60
My Satellite Setup
NEC Plasma
My Location
UK Cambs
I'm interested in getting one of these boxes. However I have an older non-hdmi screen (an NEC plasma beast).

I could either use a hdmi->dvi lead or the component output, but my question is, will the Pace box output 720p over either of these interfaces with this setup?

Or will it grey out the hdmi output options, and only do 576i or something over component?

I'm irritated with Pace too 'cos they charge £1.50 for their pdf user manual, how incredibly stingy, and I might end up not buying the box because I can't see in advance what it can do!!! Pull your fingers out, guys!!!
 

jasonx2007

Member
Joined
Apr 10, 2007
Messages
19
Reaction score
0
Points
0
Age
46
My Satellite Setup
pace ds810xe /manhatten st-200 /tecnomate 1500+ super /65cm traix dish on a satcatcher motor /1 x trex twin cam 1x dragon twin cam duolabs cas3 programmer and diablo cam light
My Location
hull city/uk
yes it would easy as for the manul you wanted thats a load off junk to read .. you get 720 easy thats all the pace box does even at 1080 it still looks the same on anychannel
hope that helps
 

jasonx2007

Member
Joined
Apr 10, 2007
Messages
19
Reaction score
0
Points
0
Age
46
My Satellite Setup
pace ds810xe /manhatten st-200 /tecnomate 1500+ super /65cm traix dish on a satcatcher motor /1 x trex twin cam 1x dragon twin cam duolabs cas3 programmer and diablo cam light
My Location
hull city/uk
Hello
We are looking into reports of issues with Diablo CAMs
but with the nature
of the CAM it is difficult to say if we will carry out a new update
to
rectify any issues found.
Does the crashing you report only occur when the CAM is used,
can you supply more details?
Best Regards
Customer Front Office
Pace Micro Technology plc

come on people email them lets get our firmware and cams working well our diablo cams
 

jasonx2007

Member
Joined
Apr 10, 2007
Messages
19
Reaction score
0
Points
0
Age
46
My Satellite Setup
pace ds810xe /manhatten st-200 /tecnomate 1500+ super /65cm traix dish on a satcatcher motor /1 x trex twin cam 1x dragon twin cam duolabs cas3 programmer and diablo cam light
My Location
hull city/uk
diablo cam is now working on pace .. using version 237 firmware

how to use set the cam up .
make sure all settings in the cam is on apart from cw fixed /card message off

do a factory restall on the pace box
scan astra 19.2 or hot bird

once done select your working package and insert cam
if it comes up with wrong ci take it out and reinsert it
make sure all keys are working . if not input them in cam
and reinstall the cam in ci slot

as for dragon cam update still not letting in menu still
come on diablo
 

rato

International Administrator
Joined
Jul 11, 2005
Messages
1,429
Reaction score
0
Points
38
Age
54
My Satellite Setup
DM800; Nokia 9800s; Nokia 9902S w/T-Rex 3.66
w/ Inverto IDLP-40TL +
Technisat 33 dish; Pace DS430N + Humax HDCI-2000 w/
Gibertini OP 1.25m dish w/Inverto 0.3dB. & Invacom 0.2dB. w/ Spaun SAR 411;
CAS 3;FUN7; SkyStar2; AltDVB;
My Location
Setubal, Portugal
Good news for Pace owners. They now have a CAM that finally works.:)
 

mastercare

Member
Joined
Feb 6, 2005
Messages
9
Reaction score
0
Points
0
Age
68
i assume this only applies to diablo lite cam not the wireless cos ive had no luck in getting pace working with diablo wireless?
cheers
 

jasonx2007

Member
Joined
Apr 10, 2007
Messages
19
Reaction score
0
Points
0
Age
46
My Satellite Setup
pace ds810xe /manhatten st-200 /tecnomate 1500+ super /65cm traix dish on a satcatcher motor /1 x trex twin cam 1x dragon twin cam duolabs cas3 programmer and diablo cam light
My Location
hull city/uk
it was for the diablo cam lite model as we never tryed the wireless
model to try .

only probelm now we having is the autoupdate

so now . we are stopping our support to get cams working propely
due to the fact the pace firmware is so rubbish . fed up with our box crashing ..

so in the meantime the pace hd is a free to view box only by us

so thank you all

r.i.p pace
 

mastercare

Member
Joined
Feb 6, 2005
Messages
9
Reaction score
0
Points
0
Age
68
well i can tell you..the diablo wireless does not work with pace...toally locks it or reboots it....seems to be a current issue prob reqs more current than the lite cam...
 

rato

International Administrator
Joined
Jul 11, 2005
Messages
1,429
Reaction score
0
Points
38
Age
54
My Satellite Setup
DM800; Nokia 9800s; Nokia 9902S w/T-Rex 3.66
w/ Inverto IDLP-40TL +
Technisat 33 dish; Pace DS430N + Humax HDCI-2000 w/
Gibertini OP 1.25m dish w/Inverto 0.3dB. & Invacom 0.2dB. w/ Spaun SAR 411;
CAS 3;FUN7; SkyStar2; AltDVB;
My Location
Setubal, Portugal
It is more than obvious that the fault is in the Pace's firmware that cannot handle the signals from the CAM's(sort'a like the Nokia issue). Pace should look at this fault very seriously if they want to continue selling(of what little they can) the Pace 810 model. If there is no interest from Pace in updating these issues, for sure the 810 will lose public interest and die among the other models that cannot support multicrypt CAM's.
 

eamonns

Member
Joined
Sep 22, 2010
Messages
1
Reaction score
0
Points
0
Age
54
My Satellite Setup
Pace DS810XE
My Location
Kenley, Surrey
Does anyone know how to manually setup Astra 4 on the Pace DS810XE? I have a DiSEqC motor dish. There are a number of Sats already setup but when i try to edit in the setup / antenna menu I don't have the facility to enter a new sat and it's parameters. Can anyone help?
 
Top