SnapperChris said:
Help please, I have a Plaza 550 ST, everything works fine with Moteck etc. but when I connect dish with DC actuator, I get "no pulse" when I try to move dish, this dish setup works fine with my Uniden positioner.
Chris
If an ST encounters a limit switch, then the 'no pulse' message remains until you press 'OK'. If that does not work, you could then try erasing the limits or a factory reset.
However, from what you describe, it is more likely that you have an ST550 from the initial batch that had faulty positioner hardware so you will have to return it to the retailer or Eurosat for repair. That should clear up the 'no pulse' problem.
Unfortunately even when the hardware side is repaired and working, the 36V positioner in the manhattans is still crap imho - Users find that the sats still 'drift' out of position or the receiver does crazy things like sending the dish speeding towards the eastern or western limits.
There was a number of posts from users on the Manhattan website pointing this out, but they have now conveniently disappeared. The latest v79 firmware "enhancement" has no mention of any efforts to correct this.
The wideband LNB support is a load of horse poo too!