Problem with full x 3 on astra

C

cableman

Regular Member
Joined
Dec 12, 2004
Messages
106
Reaction score
0
Points
0
Age
65
I have two ways to receive fullx. First solution is my neotion501 with embedded neotion cam. Second is Technomate tm5500cisuper with Zeta blue cam.
With both systems I can decode fullx 1 and 2 reliably. With full x 3 on astra I get the channel unscrambled for a few seconds, mayby a minute or so if I am lucky, and then the picture reverts bit by bit to scrambled. The signal shows 75% strength and 45% quality on both receivers. Anyone else have this problem with full x3?
 
M

mikk

Regular Member
Joined
Dec 22, 2004
Messages
84
Reaction score
0
Points
0
I assume you mean full-x 3M. On Astra fx3 and fx3M are available. With fx3M I have no problems but fx3 will not decode properly: sometimes no sound or picture breaking up.Also the cam (blue zeta) only decodes when in the lower or (2nd?) slot. If you dont have fx 3M re-scan, it should come in next to fx3. Good luck.
 
Top