Chr0nik
Member
- Joined
- Dec 2, 2005
- Messages
- 211
- Reaction score
- 53
- Points
- 28
- My Satellite Setup
- TM-9100 Linux receiver / Edision OS mini 4K / TM-2600 M3 motor / 110cm dish (34.5w to 50e) - 100cm dish (51.5e/52e/53e/60e)
- My Location
- Grays, Essex
Hi everybody!
I have a Stab HH90 motor and a 80cm dish with a Technomate 1000D Super receiver and I've been having major problems over here. Well, the whole thing was mounted over a month ago and I still cannot get channels from a number of satellites. Since my true south is Thor 1W (I live in SW London) I can get Thor 1W, Hotbird and Astra 1 but with the other ones I been having a lot of problems since I can only get a channel or two with either the wrong transponder or bad signal..
According to the motor manual, my lattitude is 51.5 and my longitude is 0.00 but on Multimap my lattitude is 51.46 and my longitude is is -0.10.. which one should I use?
Also, I been getting pretty stressed will all the problems going on with the receiver and the motor.. There are times whether when I'm trying to tune a transponder, I stop and the motor carries on moving. I been trying to tune the transponders from different satellites and all I get is the yellow and blue bars but when I save them, they turn back to red..
As I said, I can only get satellites close to 1W but I cannot get the rest. I've tried to use DiseCq and USALS but I been having the same problem.
Lol, another problem that I've been having is that whenever I try USALS, it works on 1 satellite but when I try to move it to another, it doesn't move or it loses the signal when I move the dish back.
My apologies if this is pretty long but I've been unable to find any solutions to these problems which is giving me a lot of problems..
Thanks for the help!
I have a Stab HH90 motor and a 80cm dish with a Technomate 1000D Super receiver and I've been having major problems over here. Well, the whole thing was mounted over a month ago and I still cannot get channels from a number of satellites. Since my true south is Thor 1W (I live in SW London) I can get Thor 1W, Hotbird and Astra 1 but with the other ones I been having a lot of problems since I can only get a channel or two with either the wrong transponder or bad signal..
According to the motor manual, my lattitude is 51.5 and my longitude is 0.00 but on Multimap my lattitude is 51.46 and my longitude is is -0.10.. which one should I use?
Also, I been getting pretty stressed will all the problems going on with the receiver and the motor.. There are times whether when I'm trying to tune a transponder, I stop and the motor carries on moving. I been trying to tune the transponders from different satellites and all I get is the yellow and blue bars but when I save them, they turn back to red..
As I said, I can only get satellites close to 1W but I cannot get the rest. I've tried to use DiseCq and USALS but I been having the same problem.
Lol, another problem that I've been having is that whenever I try USALS, it works on 1 satellite but when I try to move it to another, it doesn't move or it loses the signal when I move the dish back.
My apologies if this is pretty long but I've been unable to find any solutions to these problems which is giving me a lot of problems..
Thanks for the help!