tsga23
Member
- Joined
- Oct 17, 2006
- Messages
- 2
- Reaction score
- 0
- Points
- 0
- Age
- 71
- My Satellite Setup
- GbSat plus motorised 1 M dish.
- My Location
- Dorset, England
I have had a motorised setup for over 3 years but I could only see from 28E to 30W due to the dish position.
My installer has resited the dish because I want to get to 53E to pick up the Russian / Ukrainian stations. I can now receive ok from 45E to beyond 30W. However, I cannot quite get 53E most of the time. Sometimes the motor will just about get there with USALS but I cannot move the motor any further East.
I am using an HH100 motor, a 1 meter dish and a GBSAT 2CI0 receiver.
It seems like there is a limit set at about 55E. I am located at 1.8W.
I have looked at the HH100 manual on the Internet and it says that it should go from 65E to 65W. My installer has contacted the wholesalers and they say that the HH100 manual is wrong and that the motor only goes from approx 50E to 50W. They say that I need a different motor.
Am I being given the correct info from my installer?
Does anyone have any suggestions?
My installer has resited the dish because I want to get to 53E to pick up the Russian / Ukrainian stations. I can now receive ok from 45E to beyond 30W. However, I cannot quite get 53E most of the time. Sometimes the motor will just about get there with USALS but I cannot move the motor any further East.
I am using an HH100 motor, a 1 meter dish and a GBSAT 2CI0 receiver.
It seems like there is a limit set at about 55E. I am located at 1.8W.
I have looked at the HH100 manual on the Internet and it says that it should go from 65E to 65W. My installer has contacted the wholesalers and they say that the HH100 manual is wrong and that the motor only goes from approx 50E to 50W. They say that I need a different motor.
Am I being given the correct info from my installer?
Does anyone have any suggestions?