Remote Control Of Satelite Receiver

PACH

New Member
Joined
Oct 18, 2012
Messages
2
Reaction score
0
Points
0
My Satellite Setup
Technomate TM5200 Satelite receiver + 80cm dish +1LNB.Direct coax link from the receiver in the lounge to a bedroom TV
My Location
North Yorkshire
I had the following system installed : Technomate TM 5200 satelite receiver + 80cm dish with one LNB. The receiver is connected to the TV in the lounge and a coax cable is linked from the receiver to an upstairs TV. The original spec that I required from the installer was that I needed to be able to change channels of the receiver on the bedroom TV also. Unfortunately the installer did not manage to get the remote option working,let down very badly, so now the only way to watch a certain satelite channel is to change it in the lounge.
Can somebody recommend a simple and not very expensive system that I can install to do the remote channel change?
Thanking you in advance.
 

mariust5

Specialist Contributor
Joined
Dec 8, 2005
Messages
507
Reaction score
120
Points
43
Age
46
My Satellite Setup
Cristor Atlas 100HD , motorised 1.1 Triax on Stab H-H
My Location
hastings , uk
_http://www.ebay.co.uk/itm/One-for-All-SV1715-TV-Audio-Visual-AV-Sender-/330805107591?pt=UK_ConsumerElectronics_WirelessVideoTransmitters_CA&hash=item4d05855b87
 

PACH

New Member
Joined
Oct 18, 2012
Messages
2
Reaction score
0
Points
0
My Satellite Setup
Technomate TM5200 Satelite receiver + 80cm dish +1LNB.Direct coax link from the receiver in the lounge to a bedroom TV
My Location
North Yorkshire
_http://www.ebay.co.uk/itm/One-for-All-SV1715-TV-Audio-Visual-AV-Sender-/330805107591?pt=UK_ConsumerElectronics_WirelessVideoTransmitters_CA&hash=item4d05855b87

Thank you for your reply. I understand that there is a lot of interference using wireless option and as the receiver is already connected by coax cable to the second TV there will be anotheroption.
 

Burnham Beech

Specialist Contributor
Joined
Jan 1, 2000
Messages
1,047
Reaction score
53
Points
48
The Omni link system works very well. It uses the coax cable you already have connected to your second TV.

It uses the same system that Ѕky uses for their magic eye version, but can be used with any satellite receiver.
 

pgh13

Specialist Contributor
Joined
Apr 5, 2005
Messages
1,688
Reaction score
414
Points
83
Age
72
My Satellite Setup
XTrend ET8000, Dr HD 15, PC/twinhan combination. 80cm dish. GBPVR with 2 DTTV cards +hauppauge Media MVP +Raspberry Pi running XBMC
My Location
Midlands UK
So How about this again on E__y? 170925522410 Just transmits the remote signals
 
Top