dmaavrigdo
Member
- Joined
- May 26, 2009
- Messages
- 348
- Reaction score
- 309
- Points
- 63
- My Satellite Setup
-
1.2m Laminas OFC1200 dish
Inverto Quad Black Ultra IDLT-QDL412-ULTRA-OPN
Octagon SF8008 twin
Yamaha HTR-2067
- My Location
- Vansbro Sweden
Some buttons weren't working so I got some conductive paint from China. The problem was it didn't dry fully and would come off on the circuit board.
Solved the problem by putting drops of the paint on a piece of printer paper where it did dry then cutting out small circles and super glueing to the silicone buttons.
Solved the problem by putting drops of the paint on a piece of printer paper where it did dry then cutting out small circles and super glueing to the silicone buttons.