Just Sharing This Repairing broken gear jaeger smr 1224

Trust

Trust

Specialist Contributor
Messages
857
My Satellite Setup
1.8 m CM at SMR 1224 + Elev. with 7 lnb changer Ku (lin - circ) - Ka (lin - circ) C (lin - circ)
My Location
Nijmegen Netherlands
Restoration Jaeger SMR 1224 Rotor
While waiting for finding a spare worm gear , decided to give it a try to repair the broken worm .

broken worm axel.jpg

Drilled at a lathe 7 mm holes in both ends

Drilling worm.jpg

Made a 7 mm shaft from a steel bolt .

new shaft.jpg

Put en pressed the parts inline together with Loctite .

glue pressing.jpg


And here the result , just have to polish the cracked location .

repaired worm.jpg


worm repaired.jpg
 
John

John

Enthusiast.
Messages
2,348
Location
North Nottinghamshire.
My Satellite Setup
Elite 2.2 PF - CM1.8 - CM1.2 - Gibertini 1.25.
Ku - Ka -C & Ext C.
PC cards-TM5402 receivers.
Promax FSM.
My Location
North Nottinghamshire.
Restoration Jaeger SMR 1224 Rotor
While waiting for finding a spare worm gear , decided to give it a try to repair the broken worm .

View attachment 124401

Drilled at a lathe 7 mm holes in both ends

View attachment 124402

Made a 7 mm shaft from a steel bolt .

View attachment 124403

Put en pressed the parts inline together with Loctite .

View attachment 124404


And here the result , just have to polish the cracked location .

View attachment 124405


View attachment 124406



... where's there's a will-there's a way
 
Lazarus

Lazarus

Tout Rond Bon Oeuf
Staff member
Messages
25,574
My Satellite Setup
80cm Motorised.
Several small Dishes.
Much else.
My Location
North York Moors
Great stuff.
 
Channel Hopper

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Messages
28,160
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK South
Impressive.
 
Captain Jack

Captain Jack

Модератор
Staff member
Messages
10,812
My Satellite Setup
See signature
My Location
North Somerset
Master at work.
 
jeallen01

jeallen01

Specialist Contributor
Messages
3,903
My Satellite Setup
See Signature
My Location
Somewhere in England (possibly?)!
@Trust1 - Would have thought that it might have been useful to leave the bolt in place with Loctite on that, or did you actually do that?
 
Trust

Trust

Specialist Contributor
Messages
857
My Satellite Setup
1.8 m CM at SMR 1224 + Elev. with 7 lnb changer Ku (lin - circ) - Ka (lin - circ) C (lin - circ)
My Location
Nijmegen Netherlands
For sure I did , if I wanted just to glue it , there was no need for drilling
 
Top