ROM110 AC3 unlooper help?

caketin

Member
Joined
Aug 11, 2006
Messages
11
Reaction score
0
Points
0
Age
57
My Satellite Setup
Echostar ad3000ipva motorised setup
My Location
United Kingdom
Hi

I know this is an international Portuguese forum,but I am looking for expert help.
I have a rom 110 ac3 card.
I have been using rom110 studio v1.6
I am trying to set up my unlooper to glitch into the card.
I have used a resistance of 2.2k on the variable resistor unlooper and PSU at 9v but the response was bad.
The response was nothing like the one given in the rom110 studio document.
I tried to set up the resistor,and found 50ohms to give a good response.
Would it be better to leave the variable resistor at 2.2k and adjust the vcc start and vcc limit in the configuration menu?
Sorry for the post being in English.
Babelfish translator very bad in your language.
Theres not much point in me making a post in the English forums either.
I cant see many English posts in regards to mosc rom110 ac3.
Any help would be appreciated.

caketin
 

skybandit

Member
Joined
Mar 18, 2008
Messages
3
Reaction score
0
Points
0
Age
67
My Satellite Setup
dvb
rom102
usb atmega256
atmega128
My Location
canada
Im assuming you are using a powersync unlooper. 2.2k ohms was used for the hu cards way back when dtv was hacked. try setting your pot between 180-220 ohms and you may find you have better results. Good luck!
ooops! just noticed the date of your post, guess im a little late...lol
 

rejao

Member
Joined
May 16, 2008
Messages
1
Reaction score
0
Points
0
Age
57
My Satellite Setup
todo sobre satelit
My Location
brasil
ola amigos como emcontra rom110 studio v1.6 ñ acho
 

john_graydon

Regular Member
Joined
Aug 24, 2003
Messages
2,219
Reaction score
3
Points
38
Age
64
My Satellite Setup
Azbox premium HD+,Dusty Dreambox 7000s,& Sky HD.
My Location
Dublin....Ireland
caketin said:
Hi

I know this is an international Portuguese forum,but I am looking for expert help.
I have a rom 110 ac3 card.
I have been using rom110 studio v1.6
I am trying to set up my unlooper to glitch into the card.
I have used a resistance of 2.2k on the variable resistor unlooper and PSU at 9v but the response was bad.
The response was nothing like the one given in the rom110 studio document.
I tried to set up the resistor,and found 50ohms to give a good response.
Would it be better to leave the variable resistor at 2.2k and adjust the vcc start and vcc limit in the configuration menu?
Sorry for the post being in English.
Babelfish translator very bad in your language.
Theres not much point in me making a post in the English forums either.
I cant see many English posts in regards to mosc rom110 ac3.
Any help would be appreciated.

caketin
You will need to flash your glitcher with newdrs. You will need rom 110ac3 script. 4619 chips installed on your glitcher. Make sure you dump your script 1st.

Você precisará de piscar seu glitcher com newdrs. Você precisará o certificado da ROM 110ac3. 4619 microplaquetas instaladas em seu glitcher. Certifique-se que você despeja seu certificado ø.
 

skybandit

Member
Joined
Mar 18, 2008
Messages
3
Reaction score
0
Points
0
Age
67
My Satellite Setup
dvb
rom102
usb atmega256
atmega128
My Location
canada
John_graydon
trying to pm you but i dont have a reply option in my pm box. :-doh!
 

Topper

Amo Amas Amant Admin
Staff member
Joined
Nov 18, 2004
Messages
23,991
Reaction score
4,014
Points
113
Age
69
My Satellite Setup
Has gone to a good home elsewhere
My Location
Blackburn, Lancashire
skybandit said:
John_graydon
trying to pm you but i dont have a reply option in my pm box. :-doh!

Sorry PM privileges are not available to new members you will have to post your question provided it is within the rules which I am sure you read
 

skybandit

Member
Joined
Mar 18, 2008
Messages
3
Reaction score
0
Points
0
Age
67
My Satellite Setup
dvb
rom102
usb atmega256
atmega128
My Location
canada
Topper said:
Sorry PM privileges are not available to new members you will have to post your question provided it is within the rules which I am sure you read
i was just trying to reply to his pm.. no worries
 

fatbunny

Member
Joined
Jul 24, 2008
Messages
1
Reaction score
0
Points
0
Age
46
My Satellite Setup
DM500s only at the mo.
My Location
Ireland
john_graydon said:
You will need to flash your glitcher with newdrs. You will need rom 110ac3 script. 4619 chips installed on your glitcher. Make sure you dump your script 1st.

Você precisará de piscar seu glitcher com newdrs. Você precisará o certificado da ROM 110ac3. 4619 microplaquetas instaladas em seu glitcher. Certifique-se que você despeja seu certificado ø.


Can this be done with a powersync? Is there a script for ac3 or do I need to use the romstudio program? Not sure what you mean by dump your script?

Sorry for the noobish questions, hope I'm not outta line either.
 

Topper

Amo Amas Amant Admin
Staff member
Joined
Nov 18, 2004
Messages
23,991
Reaction score
4,014
Points
113
Age
69
My Satellite Setup
Has gone to a good home elsewhere
My Location
Blackburn, Lancashire
Thread moved from Portuguese section
 
Top