Samsung DSR9500 - Not recognizing Funcard

jchurch

Member
Joined
Jun 27, 2003
Messages
2
Reaction score
0
Points
0
Hi ,

I`ve just become a member on the forum and have just acquired
a USB Infinity programmer with Fun card 5.
I was hoping that some of you clever guys out there could help me out
with a problem I`ve got.

I have a Samsung 9500 VIA CI which I`ve patched with software version 118 giving the 5 in 1 patch.

I`ve managed to program the funcard OK to get ABSAT channels using the file `2ndfun5in1v1.20_Jula_AU_18.06.2003.`
After unzipping , this comes with a flash.hex file ,
`eprom_integral.hex` file and a `eprom_by_jula.hex` file.
All these load into the funcard5 via the Infinity USB programmer
with no problem. After I insert the card in the Samsung9500 it recognises the card as a Mediaguard card OK.


My problem is when I try using a different 6in1 file.
I downloaded the file off Phillsfiles.com. It is called
`davem_fun_6in1_030703.zip`.
After unzipping it it and reading the readme.txt it looked like the
files should work with a Samsung9500.

The files that I loaded onto the funcard5 were :
`flash_6in1_v4.3.hex` into the flash area of the card.
`eeprom_H_030703.hex` into the external eprom area of the card
I left the internal eeprom area blank.

Unfortunately the Samsung does not recognize the card and when I go into
the card information menu on the Samsung whereas it said mediaguard on the `2ndfun5in1v1.20_Jula_AU_18.06.2003.` files it now says
`no card` with the davem_fun_6in1_030703 files

Does anybody know why the samsung is not recognising the card.

Do I need a different type of card - eg Gold or silver ?
Do I need a different CAM.Eg Irdeto - as I understand that a lot of the
5 in 1 files operate via irdeto somehow.

I was under the impression that the 5in1 patch allowed the Samsung to
recognise : Viaaccess ,conax , Seca Mediaguard , Nagro.
I`m not sure if it does the irdeto. Does anybody know ?

Any help would be most appreciated.

Its all a bit confusing at the moment but I hope to get my head around it in the next couple of weeks.

Thanks in advance for any help.
 

rolfw

Believe it when I see it Admin.
Staff member
Joined
May 1, 1999
Messages
38,292
Reaction score
1,615
Points
113
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
Although I have no experience with the patched Sammy, is there a CAM menu in which you can select different modes for the CAM, it certainly sounds as if you have used the correct procedure with the Dave M files, but may also be worth trying the Xamuh files, they are set up specifically for the Sammy.
 

turny

Regular Member
Joined
Jan 3, 2003
Messages
31
Reaction score
0
Points
0
Age
59
Website
msn.co.uk
My Location
tyne and wear
hi jchurch
the answer to your question has already been answered look at receiver upgrades and a post by steve102 remember reading past posts can be a hive of information some of it good some of it not so good.
 

jchurch

Member
Joined
Jun 27, 2003
Messages
2
Reaction score
0
Points
0
Thanks Rolfw / Turny

OK thanks for the information. Looks like I need an Irdeto CAM for these type of files then.
 

mehdi13523693

Member
Joined
Apr 5, 2004
Messages
15
Reaction score
0
Points
0
Age
50
i have samsung9500 that cant read card and open the scramble chanales
how can i get a software for opening the scramble chanal without card or with card?
 

T24

Info Exec
Joined
Oct 9, 2002
Messages
566
Reaction score
5
Points
18
Which samsung 9500 do you have?? VIACI,AY,Ci.........?
 

T24

Info Exec
Joined
Oct 9, 2002
Messages
566
Reaction score
5
Points
18
Yes,your samsung can decrypt Viaccess channels.if your samsung is patched it can

decrypt alot of channels.(load your receiver with samsung EMU) or load a silver card

with bbaio files (6in1) insert the card into the embedded cam.

Ps-insert the card into the embedded cam correctly,the chip downward..

(power OFF/ON)

Load the latest via..files works fine on fun card.

Good luck





Good luck
 

safad

Member
Joined
Mar 30, 2004
Messages
1
Reaction score
0
Points
0
Age
65
You can use the funcard with the Sidd-9 files you can found this files in the tonys duo site
 

T24

Info Exec
Joined
Oct 9, 2002
Messages
566
Reaction score
5
Points
18
Bb aio files (6in1) on Silver card works much better than sidfun9.
 

ardalanlp

Member
Joined
Sep 17, 2004
Messages
2
Reaction score
0
Points
0
Age
42
i want software for samsung 9500 VIA CI
and i want watching the nagra channel & irdeto channel
what can i do?
thanks a lot
 

T24

Info Exec
Joined
Oct 9, 2002
Messages
566
Reaction score
5
Points
18
Do you have a patched VIACI?

check the hardware,software,loader

Menu>system setup>system information.
 

mnadeem

Regular Member
Joined
Aug 31, 2003
Messages
135
Reaction score
1
Points
0
Website
Visit site
hi i have same problem , the fun card is not recognizing with the receiver , but my receiver is not samsung as every one talking , It is redix dt-43 s vaci
software version DT-43S V1.0.00
firmware V1.2.1-1614SA
Terminal serial number 34-1-0001469
Viaccess version 1.1 R 484
terminal application 1000.121
O-no
so if any one can tell me what should i do, greatful to him :D
 

hormoz

Member
Joined
Nov 6, 2004
Messages
1
Reaction score
0
Points
0
Age
49
reza121 said:
pls help for upgrade eurostar model 9700f
I have the same problem, If you find the answer please say it to me.
Thanks,
Hormoz
 
Top