hi
I could need a small Guidance with this since i can´t really see anywhere and there is just too much of everything... :/
I have a dish with 4 universal headers or DiSEqC pointed to each satellite. I have tried a bit on both Setup4PC and DVBprog.
on Setup4PC I can´t get any signal of the other DiSEqC options.. only Pos A - Opt A as it seems . Overall I just get a signal for Astra 1b as it seems. So do I need to setup the 4 satellites on both?.. and which name should be selected when rightclicking the status symbol,,, there are so bloody many hehe
All I know is that is that I shuld have the DiSEqC settings in DVBprog to "1.0 or 2.0" and then add the following LNB. And that is where I am kinda stuck. I am not sure which header is pointed to which satellite but that could be tested so it won´t be difficult to see.
I have tried looking at lyngsat.com but that shows where the dish should point at and so and I am just unsure about all the settings in DVBprog, like what to have in LOF1 and 2 and also Switch.
My following pointed satellites are:
Sirius 5 E
Thor 1 W
Astra 19.2 E
Hotbird 13 E
I would like to recieve all channels on those followings....
I live in sweden and is using the Sky Star 2 pci card
thanks
I could need a small Guidance with this since i can´t really see anywhere and there is just too much of everything... :/
I have a dish with 4 universal headers or DiSEqC pointed to each satellite. I have tried a bit on both Setup4PC and DVBprog.
on Setup4PC I can´t get any signal of the other DiSEqC options.. only Pos A - Opt A as it seems . Overall I just get a signal for Astra 1b as it seems. So do I need to setup the 4 satellites on both?.. and which name should be selected when rightclicking the status symbol,,, there are so bloody many hehe
All I know is that is that I shuld have the DiSEqC settings in DVBprog to "1.0 or 2.0" and then add the following LNB. And that is where I am kinda stuck. I am not sure which header is pointed to which satellite but that could be tested so it won´t be difficult to see.
I have tried looking at lyngsat.com but that shows where the dish should point at and so and I am just unsure about all the settings in DVBprog, like what to have in LOF1 and 2 and also Switch.
My following pointed satellites are:
Sirius 5 E
Thor 1 W
Astra 19.2 E
Hotbird 13 E
I would like to recieve all channels on those followings....
I live in sweden and is using the Sky Star 2 pci card
thanks